SDCE Digital On/Off Benchtop Temperature Controller

Starting at $323.00

/ Each

Description

BriskHeat SDCE Benchtop Digital Temperature Controller is compatible with a wide range of heaters and surface heating applications. The Digital Temperature Controller is designed for general-purpose use in indoor environments to control temperatures on applications requiring automatic temperature control.

Touch-screen operation
Display programmable in °F and °C
Includes factory-wired temperature sensor
Plug-and-play, benchop design

Part Number

SDCE-Series

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Specifications

Voltage:

120 VAC model: 100 to 125 VAC
230 VAC model: 100 to 240 VAC

Maximum Amp Load: 8 amps @ 120/240 VAC
Temperature Control Range:

Type-J model: -40°F to 698°F (-40°C to 370°C )
Type-K model: -40°F to 899°F (-40°C to 482°C)
PT100-RTD model: -58°F to 842°F (-50°C to 450°C)

Temperature Display Units: °F and °C
Sensor Input: 5 ft (1.5 m) Type-J or Type-K thermocouple or PT100-RTD factory installed
Hysteresis: Adjustable setting from 1°–99° (°F or °C)
Alarms: Audible; programmable for high or low range
Input Power Cord/Connections: Designated by model
Output Power Cord/Connection:

120 VAC model: NEMA 5-15R receptacle
230 VAC model: Neutrik receptacle with mating plug (PN: 41329-03)

Environmental Exposures:

Operating range: 32°F to 100°F (0°C to 38°C)
Storage range: -4°F to 158°F (-20°C to 70°C)
Relative humidity: < 95% non-condensing temperatures

Enclosure Dimensions: 5.25 in W x 2.25 in H x 5 in D (133 mm W x 57 mm H x 127 mm D)

CE approved for Ferrule Ends, Schuko and UK Type G plug type

Ordering Information

Part No.	Voltage	Sensor Type	Input Power Cord
SDCERA	120V	PT100/RTD	6.6 ft (2 m) cord NEMA 5-15 plug
SDCEJA	120V	J-Type	6.6 ft (2 m) cord NEMA 5-15 plug
SDCEKA	120V	K-Type	6.6 ft (2 m) cord NEMA 5-15 plug
SDCERB	230V	PT100/RTD	6.6 ft (2 m) cord ferrule-terminated leads
SDCEJB	230V	J-Type	6.6 ft (2 m) cord ferrule-terminated leads
SDCEKB	230V	K-Type	6.6 ft (2 m) cord ferrule-terminated leads
SDCERC	230V	PT100/RTD	6.6 ft (2 m) cord NEMA 6-15
SDCEJC	230V	J-Type	6.6 ft (2 m) cord NEMA 6-15
SDCEKC	230V	K-Type	6.6 ft (2 m) cord NEMA 6-15
SDCERD	230V	PT100/RTD	6.6 ft (2 m) cord Schuko CEE 7/7 Plug
SDCEJD	230V	J-Type	6.6 ft (2 m) cord Schuko CEE 7/7 Plug
SDCEKD	230V	K-Type	6.6 ft (2 m) cord Schuko CEE 7/7 Plug
SDCERE	230V	PT100/RTD	8.2 ft (2.5 m) cord UK Type G plug
SDCEJE	230V	J-Type	8.2 ft (2.5 m) cord UK Type G plug
SDCEKE	230V	K-Type	8.2 ft (2.5 m) cord UK Type G plug

Compare Solutions

SDC vs SDCE Comparison

Back
Size	5.5" x 4.25" x 1.75"	5.25" x 5.0" x 2.25" Slightly larger
Relay Output Capacity	10A	8A
Temperature Sensor Options	J-type K-type	J-type K-type RTD/PT100
Accuracy	+/- 1% FS	+/- 0.5% span +/- 1 digit @77°F
Factory Installed Temperature Sensor	Yes	Yes
Input Power Cord Options	(120V) 3-prong NEMA 5-15 (240V) 3-prong NEMA 6-15 (240V) No-plug Ferule Crimped Leads	(120V) 3-prong NEMA 5-15 (230V) 3-prong NEMA 6-15 (230V) No-plug Ferule Crimped Leads (230V) European Schuko CEE 7/7 (230V) UK Type G
Input Power Cord Connection	Built-in Power Cord (not interchangeable)	Modular Power Receptacle with Power Cord (interchangeable)
Voltage	(120V) 98-132VAC (240V) 184-253VAC	(120V) 100-120VAC (230V) 100-240VAC
Temperature Display °C/°F	Fixed °C or °F	Programable in either °C or °F
Controller Interface	Push Button	Touch Screen
Output (Heater) Power Connection	Power Cord With Output Power Receptacle. (120V) NEMA 5-15R (240V) NEMA 6-15R (mating plug sold separately)	Built-in Output Power Receptacle. (120V) NEMA 5-15R (230V) Neutrik Receptacle (mating plug provided)