High Temperature Limit Controller
Description
BriskHeat High Temperature Limit Controller keeps excessive temperatures at bay and adds a little extra safety to your temperature controllers. This high limit controller is compatible with all BriskHeat controllers and provides high-limit cutoff protection for a wide range of indoor, dry environment applications.
Includes: 5 ft power cord, 10 ft temperature sensor, receptable for controller or controlled device
- 4-key touch pad interface with manual reset
- Available in 120 or 240 voltages
- °F or °C display options
Part Number
Voltage: 120 or 240 VAC (as ordered)
Maximum Amp Load: 15 amps
Temperature Control Range: 0°F to 999°F (0°C to 999°C)
Temperature Display Units: °F and °C (as ordered)
Sensor Input: Mini-connector, 10 ft (3 m) long, Type-J or Type-K Thermocouple (included)
Control Module: FM-approved with mechanical relay
Accuracy: ± 1% full scale
Alarms: Audible
Input Power Cord/Connections: 5 ft (1.5 m) long with input power plug based on model
Output Connection: Receptacle to match input cord
Environmental Exposures:
- Operating range: 32°F to 150°F (0°C to 66°C)
- Storage range: -4°F to 176°F (-20°C to 80°C)
- Relative humidity: < 95% non-condensing temperatures
Enclosure Dimensions: 5.25 in x 2.25 in x 5 in  (133 mm x 57 mm x 127 mm)
*HL101 requires a temperature controller (sold separately) except where included on heater.
**All safety-critical components, enclosures and materials used in the manufacture of this product are UL Listed/Recognized and suitably rated for the intended application.
Part No. | Voltage | Sensor Type | Temperature Display | Input Plug/Output Receptable |
HL120JA-F | 120 VAC | Type-J T/C | °F | NEMA 5-15 |
HL120KA-F | 120 VAC | Type-K T/C | °F | NEMA 5-15 |
HL120JA-C | 120 VAC | Type-J T/C | °C | NEMA 5-15 |
HL120KA-C | 120 VAC | Type-K T/C | °C | NEMA 5-15 |
HL240JC-F | 240 VAC | Type-J T/C | °F | NEMA 6-15 |
HL240KC-F | 240 VAC | Type-K T/C | °F | NEMA 6-15 |
HL240JC-C | 240 VAC | Type-J T/C | °C | NEMA 6-15 |
HL240KC-C | 240 VAC | Type-K T/C | °C | NEMA 6-15 |
Provides current cutoff to separate temperature controllers or devices with built-in temperature control upon reaching or exceeding a programmed high-limit setpoint temperature.
Applications include:
- Research and development
- Laboratory testing
- Temperature-critical processes
- Equipment over-heat protection
- Adhesive curing
- Where alarm latching is required
Industries:
- Laboratory/R&D
- Petrochemical
- General Manufacturing
- Agriculture
- Chemical
- Food and Beverage
- Plastics
Don't see your size or option?
Have a question about which BriskHeat product is right for you?
Need Application assistance? Contact Us. We are here to help!
- Monday - Friday
8:00am - 5:00pm EST
- Worldwide
1-888-412-0122