HotBelt™ Wrap-Around Refrigerant Jug Warmer - BriskHeat



HotBelt™ Refrigerant Jug Warmer

Briskheat Refrigerant HVACR systems - cylinder warming belt - BriskHeat

BriskHeat HotBelt™ Wrap-Around Refrigerant Tank & Jug Warmer

The first BriskHeat product designed specifically for HCAVR professionals! The ideal solution for pre-heating and keeping refrigerant jugs warm when servicing HVACR systems in cold environments. The HotBelt provides increased efficiency by speeding up service times and reducing wasted refrigerant materials. The adjustable strap allows for a hook and loop to fit several size jugs.

The HotBelt warmer is designed to quickly elevate and maintain surface temperature at approximately 120°F (49°C). As a result, the refrigerant within the cylinder is warmed to a safe and optimal temperature for servicing; reducing waste and providing efficiency. Stop using hot water and heat your Refrigerant jugs with BriskHeat HotBelt today!

  • PreHeat and warm refrigerant jugs to speed up charging
  • Ensure adequate cylinder pressure for servicing A/C or refrigeration systems
  • Ideal for portable field service use
  • Built-in preset thermostat for easy plug-and-play use
  • Exceptional flexibility, durability, and heat uniformity
  • Rapid heat-up and thermal response
  • Adjustable fit design with hook & loop strap: fits most 30lb, 50lb, and 125lb jugs
  • Safe for R-410A, R-407C, R134a, R-22, and more
  • Moisture and chemical resistant
  • Grounded for safety
  • Preset thermostat: Designed to maintain surface temperature at 120°F (49°C) in 32°F (0°C) ambient conditions*
  • Power density: 1.4 W/in2 (0.002 W/mm2)
  • Power cord: 6ft (2m) cord with power plug
  • Fits standard cylinders: 30lb, 50lb, and 125lb
  • Adjustable strap fits cylinder diameters:
    • Minimum 9” (229mm)
    • Maximum 13” (330mm)
  • Width: 6” (152mm)
  • Length: 26” (660mm)
  • Heater ingress protection rating: IP56

* Variations in ambient temperature and material contents within the cylinder may affect actual surface temperature of the cylinder.

Wrap the Refrigerant Tank & Jug Warmer heater around the cylinder and secure the heater using the extra-long strap. It is important that the heater fits tightly. Check to make sure that the area behind the thermostat which is near the edge of the heater is making good contact with the surface of the cylinder. The heater should be positioned near the bottom of the cylinder to be most efficient.

After positioning the heater on the cylinder, insert the plug into a polarized outlet (appropriately rated for your heater’s voltage). When plugged in, the heater will automatically begin to heat. When the surface temperature of the cylinder reaches approximately 158°F (70°C) at the built-in sensor, the heater will automatically shut-off. The heater will automatically begin to heat again when the surface temperature of the cylinder drops to approximately 147°F (64°C) at the built-in sensor. The heater will begin to cycle on/off under normal thermostatic control to maintain the cylinder surface temperature at 147°F (64°C) to 158°F (70°C) at the built-in sensor.

The built-in thermostat is designed to maintain approximately 120°F (49°C) actual surface temperature of the cylinder in 32°F (0°C) ambient conditions. Variations in ambient temperature and material contents within the cylinder may affect the surface temperature of the cylinder.

Configuration Options
NOTE: Selecting Configuration Options limit / refine the available products; to match your selection criteria.

Available Options: HotBelt™ Refrigerant Jug Warmer

Quantity Part Number Voltage Power Plug Type Wattage Price UOM
HB1001 120 3-Prong NEMA 5-15 200

Regular Price: $109.00

Special Price $99.00

HB2001 240 NEMA 6-15 200

Regular Price: $109.00

Special Price $99.00

HB2002 230 CEE 7/7 200

Regular Price: $109.00

Special Price $99.00

NOTE: Selecting Configuration Options limit / refine the available products; to match your selection criteria.

Customers Who Viewed This Were Also Interested In

Don't see your size or option? Have a question about which BriskHeat product is right for you? Need Application assistance? Contact Us. We are here to help!

Monday - Friday
8:00am - 5:00pm EST
Worldwide
1-614-294-3376