SpeedTrace Self-Regulating Heating Cable - BriskHeat



SpeedTrace Self-Regulating Heating Cable

SpeedTrace Pipe Heating Cable - BriskHeat

BriskHeat SpeedTrace heating cables are an ideal solution for Ideal for easy to install pipe freeze protection and safe thawing of metal and plastic pipe & valve assemblies. May be used on metal and plastic water pipes, for pipe heating, but not on flexible vinyl tubing, (such as garden hoses). SpeedTrace Heating cable self-regulates the pipe heating cables temperature by automatically adjusting electric cable heat output based on surface and ambient temperatures. Plug-and-Play easy to install pipe heating solution!

self regulating heating cable

  • Automatically adjusts heat output based on surface and ambient temperatures
  • No temperature controller is required
  • Plug-in ready pre-assembled power cord
  • Grounded design for added safety
  • Suitable for extreme cold conditions as low as -40°F (-40°C)
  • Safe for indoor and outdoor use
  • Safe to overlap heating cable for easy installation
  • Use with Insul-lock° DS foam insulation for maximum thermal efficiency

Be sure to checkout our Cut-to-Length Self-Regulating Heating Cable to order based on your pipe length needs.

- For more information on How-To Install Pipe Heating Cable, click here

  • Supply voltage: 110-120VAC or 208-277VAC

  • Nominal Power Output

    • SpeedTrace: 5 watts/ft (16 watts/m) at 50°F (10°C)
    • SpeedTrace Extreme: 8 watts/ft (26 watts/m) at 50°F (10°C)
  • Maximum exposure temperature 150°F (65°C)

  • Moisture and flame resistant thermoplastic elastomer outer jacket

  • 16 AWG bus wires

  • Pre-terminated 30” (76cm) long power cord with

    • 110-120VAC:   Standard 3-prong grounded plug (NEMA-5-15)
    • 208-277VAC:   Bare wire leads
  •  

 

How Self-Regulating Cable Works

 

  • The semi-conductive core material contains a graphite network, which allows electricity to flow from one bus wire to the other. When the core is dense and colder, there are many paths for electricity to take through the graphite network, producing more heat.

  • Since the core material expands as it heats, the graphite network is elongated, disrupting some of the paths. More and more paths are disrupted as heating continues until the system reaches self-controlled thermal stability. When the core material cools, it contracts, reconnecting some of the electrical paths in the graphite network, and more equivalent heat is produced.

  • This temperature response occurs independently at each point along the heater. If an externally produced high temperature occurs next to a low temperature in the cable, each section of heating cable will adjust its own heat output in relation to its own local requirements.

 

Configuration Options
NOTE: Selecting Configuration Options limit / refine the available products; to match your selection criteria.

Available Options: SpeedTrace Self-Regulating Heating Cable

Quantity Part Number Type Voltage Length Price UOM
FFSL1-100 SpeedTrace 110-120 100 ft (30.5 m)
$195.00
EA
FFSL1-12 SpeedTrace 110-120 12 ft (3.7 m)
$40.50
EA
FFSL1-125 SpeedTrace 110-120 125 ft (38.1 m)
$256.25
EA
FFSL1-150 SpeedTrace 110-120 150 ft (45.7 m)
$307.50
EA
FFSL1-18 SpeedTrace 110-120 18 ft (5.5 m)
$50.00
EA
FFSL1-24 SpeedTrace 110-120 24 ft (7.3 m)
$61.25
EA
FFSL1-50 SpeedTrace 110-120 50 ft (15.2 m)
$108.75
EA
FFSL1-6 SpeedTrace 110-120 6 ft (1.8 m)
$31.25
EA
FFSL1-75 SpeedTrace 110-120 75 ft (22.9 m)
$152.50
EA
FFSL2-100 SpeedTrace 208-277 100 ft (30.5 m)
$195.00
EA
FFSL2-12 SpeedTrace 208-277 12 ft (3.7 m)
$40.50
EA
FFSL2-125 SpeedTrace 208-277 125 ft (38.1 m)
$256.25
EA
FFSL2-150 SpeedTrace 208-277 150 ft (45.7 m)
$307.50
EA
FFSL2-18 SpeedTrace 208-277 18 ft (5.5 m)
$50.00
EA
FFSL2-24 SpeedTrace 208-277 24 ft (7.3 m)
$61.25
EA
FFSL2-50 SpeedTrace 208-277 50 ft (15.2 m)
$108.75
EA
FFSL2-6 SpeedTrace 208-277 6 ft (1.8 m)
$31.25
EA
FFSL2-75 SpeedTrace 110-120 75 ft (22.9 m)
$152.50
EA
FFSL81-100 SpeedTrace Extreme 110-120 100 ft (30.5 m)
$216.50
EA
FFSL81-12 SpeedTrace Extreme 110-120 12 ft (3.7 m)
$49.50
EA
FFSL81-18 SpeedTrace Extreme 110-120 18 ft (5.5 m)
$57.00
EA
FFSL81-24 SpeedTrace Extreme 110-120 24 ft (7.3 m)
$69.50
EA
FFSL81-50 SpeedTrace Extreme 120 50 ft (15.2 m)
$121.63
EA
FFSL81-6 SpeedTrace Extreme 110-120 6 ft (1.8 m)
$39.50
EA
FFSL81-75 SpeedTrace Extreme 110-120 75 ft (22.9 m)
$169.75
EA
FFSL82-100 SpeedTrace Extreme 208-277 100 ft (30.5 m)
$216.50
EA
FFSL82-12 SpeedTrace Extreme 208-277 12 ft (3.7 m)
$49.50
EA
FFSL82-18 SpeedTrace Extreme 208-277 18 ft (5.5 m)
$57.00
EA
FFSL82-24 SpeedTrace Extreme 208-277 24 ft (7.3 m)
$69.50
EA
FFSL82-50 SpeedTrace Extreme 208-277 50 ft (15.2 m)
$121.63
EA
FFSL82-6 SpeedTrace Extreme 208-277 6 ft (1.8 m)
$39.50
EA
FFSL82-75 SpeedTrace Extreme 208-277 75 ft (22.9 m)
$169.75
EA
NOTE: Selecting Configuration Options limit / refine the available products; to match your selection criteria.

Accessories

Customers Who Viewed This Were Also Interested In

Don't see your size or option? Have a question about which BriskHeat product is right for you? Need Application assistance? Contact Us. We are here to help!

Monday - Friday
8:00am - 5:00pm EST
Worldwide
1-614-294-3376