IBC Tote Tank Heaters - Wrap around IBC Heaters - BriskHeat



Wrap-around IBC/Tote Tank Heaters (TOTE)

Tote Tank Wrap-Around Full-Coverage Blanket Heater - BriskHeat

IBC/Tote Tank Heater Overview

Wrap around IBC / TOTE tank heaters are an all-in-one IBC Tank Heater solution with built-in insulation and a temperature controller to maximize heat efficiency and heat-up time. Designed to wrap around an IBC/TOTE to heat the contents while insulating to keep the heat exactly where it needs to be. Wrap around IBC/TOTE heaters provide the most practical, efficient means of freeze protection, viscosity control, thermal mixing, and temperature maintenance of materials.

  • Easy-to-use dial temperature controller available in °F or °C (see ordering options).
  • Plug-and-Play design is ready for immediate use out of the box.
  • Fits any container with a total perimeter between 160” (4064mm) to 192” (4877mm).
  • Available in three standard height sizes to meet your needs.
  • Designed for use with caged or direct contact metal and plastic IBC/TOTE containers.
  • Two-Zone heater design allows heat output to be adjusted when content levels decrease.
  • Non-Invasive wrap-around heater design allows you to heat a tote tank / IBC from the outside without risk of contaminating or scorching materials inside.
  • Built-in manual reset high-limit safety thermostat to prevent over-heating.
  • Grounded heating element meets NEC 427.23.
  • Attachment method using adjustable nylon straps with buckles (Two across the top and three around the tank).
  • Adjustable nylon straps allow the heater to fit a wide variety of tank sizes without sagging, reducing incidental damage from forklifts.
  • Mouse-hole cut-out reduces downtime by providing easy access to spigot without requiring the user to remove the heater.
  • Speed up the flow of slow moving and uncooperative contents such as honey, molasses, lube oil, and more!
  • CEROHS

* For increased thermal efficiency, add a BriskHeat IBC/TOTE cover reduce heat loss through the top surface. See IBC/TOTE tank heater accessories for more information

* 240VAC model is strongly recommended for applications that involve heat-up and melting due to the higher wattage requirements.

  • Two Styles:
    • Wrap-Around Full-Coverage Blanket Heater
    • Heating Pad that is Placed Underneath Tank / Bladder
  • Does Not Contaminate or Scorch Your Tote Tank Product
  • Durable and Long Lasting Tank heater wrap
  • Variety of Standard Sizes and Configure-to-Order Options
  • Wide Range of Tote Tank heating Applications
    • Tote Tank Viscosity control 
    • Freeze protection for Tote Tank Contents
    • Tote Tank Temperature maintenance
    • Melting of solids in Tote Tanks
    • Heat-up tote tank / IBC contents to a required temperature  
    • Tank Thermal mixing

Specifications

  • Inner Material: Silicone impregnated cloth
  • Outer Material: Silicone impregnated cloth
  • Fits any container with perimeter 160” to 192” (4064mm to 4877mm)
    • Minimum: 40" x 40" (1016mm x 1016mm)
    • Maximum: 48" x 48" (1219mm x 1219mm)
  • Three standard height sizes: 36" (914mm), 42" (1067mm), 48" (1220mm)
  • Two separate heat zones: top and bottom
  • Adjustable thermostat: 50°F to 160°F (10°C to 71°C)*
  • Built-in manual reset high-limit safety thermostat set at 195oF (91oC) for each heating zone
  • Insulation: 1/4" (6mm) fiberglass insulation
  • Available voltages: 120, 240VAC
  • Wattage:
    • 120VAC = 1440 watts
    • 240VAC = 2880 watts
  • Power cord:
    • 120VAC = 6ft (1.8m) long with standard 3-prong NEMA 5-15 power plug
    • 240VAC = 6ft (1.8m) long with standard 3-prong NEMA 6-15 power plug

 

Heater Height

Total Watts
120V / 240V

Heater Weight

36” (914mm)

1440 / 2880

34 lbs (15kg)

42” (1067mm)

1440 / 2880

34 lbs (15kg)

48” (1220mm)

1440 / 2880

34 lbs (15kg)

 

* If precise temperature control is required for your application, please contact us or your local distributor for application assistance and product solutions

How to Measure Your Tote Tank / Intermediate Bulk Container / IBC

IBC measurement guidelines

1. Measure the height of the tote tank / IBC not including the pallet or support stand.   

________   (Height)

2. Measure the length and width of the tank. This determines the tank perimeter for the heated area.

______(Tank Length) X 2    +  ______(Tank Width) X 2 = ________ (Perimeter)

Note: If heater length measurement is below 160" (4064mm) or above 192" (4877mm), contact factory for heater recommendation.

Configuration Options
NOTE: Selecting Configuration Options limit / refine the available products; to match your selection criteria.

Available Options: Wrap-around IBC/Tote Tank Heaters (TOTE)

Quantity Part Number Voltage Height Temperature Control Range Wattage Price UOM
TOTE361-ADJ 120 36" (914 mm) 50°F to 160°F 1440
$1,639.00
EA
TOTE361-ADJ-C 120 36" (914 mm) 10°C to 71°C 1440
$1,639.00
EA
TOTE362-ADJ 240 36" (914 mm) 50°F to 160°F 2800
$1,639.00
EA
TOTE362-ADJ-C 240 36" (914 mm) 10°C to 71°C 2800
$1,639.00
EA
TOTE421-ADJ 120 42" (1067 mm) 50°F to 160°F 1440
$1,829.00
EA
TOTE421-ADJ-C 120 42" (1067 mm) 10°C to 71°C 1440
$1,829.00
EA
TOTE422-ADJ 240 42" (1067 mm) 50°F to 160°F 2800
$1,829.00
EA
TOTE422-ADJ-C 240 42" (1067 mm) 10°C to 71°C 2800
$1,829.00
EA
TOTE481-ADJ 120 48" (1220 mm) 50°F to 160°F 1440
$1,979.00
EA
TOTE481-ADJ-C 120 48" (1220 mm) 10°C to 71°C 1440
$1,979.00
EA
TOTE482-ADJ 240 48" (1220 mm) 50°F to 160°F 2800
$1,979.00
EA
TOTE482-ADJ-C 240 48" (1220 mm) 10°C to 71°C 2800
$1,979.00
EA
NOTE: Selecting Configuration Options limit / refine the available products; to match your selection criteria.

Accessories

Customers Who Viewed This Were Also Interested In

Don't see your size or option? Have a question about which BriskHeat product is right for you? Need Application assistance? Contact Us. We are here to help!

Monday - Friday
8:00am - 5:00pm EST
Worldwide
1-614-294-3376