Silicone Rubber Drum/Pail Warmer (DHCSR)
Description
BriskHeat DHCS-R is a silicone rubber drum/pail wamer with a preset 85°F (29°C) built-in thermostat; our lowest maximum temperature heating band solution. These warmers are designed to heat the contents of metal or plastic drums / pails and are suitable for both indoor and outdoor applications. The warmer helps maintain elevated temperatures, enabling contents to flow even when ambient temperatures drop as low as 0°F.Â
- A great solution to prevent drum and pail contents from freezing
- Temperature ideal for freeze protection and viscosity control - maintains temperature between 67°F and 85°F (19°C to 29°C)
- Easy-to-use - simple plug-and-play design
- Rugged - provides long service life and can be used in a wide variety of environments
Â
Part Number
Additional Features:Â
- Pre-set 85°F (29°C) built-in thermostat
- Extra-wide 4" (102mm) wide heater coverage
- Designed for metal and poly drums / pails
- Moisture and chemical resistant — IP 54 rated
- 6 ft (1.8 m) long power cord with NEMA 5-15P plug
Ideal for:
- Freeze Protection
- Warming contents of drums and pails
- Preventing Chemical Separation or Crystallization
- Keeping paint warm
Heater Width: 4 in (102 mm)
Voltage: 120 VAC (other voltages available upon request)
Exposure Temperature: -60°F to 450°F (-51°C to 232°C)
Dielectric Strength: Over 2000 Volts
Attachment Type: Expandable spring closure — expands up to 3 in (76 mm)
Silicone Rubber Density: 46.0 oz/yd² (1560 g/m²)
Power Cord: 6 ft (1.8 m) long with standard 120 VAC: 3-prong grounded plug (NEMA 5-15P)Â
Ingress Protection Rating: IP54
Note:
- If precise temperature control is required for your application, please contact us or your local distributor for application assistance.
- Heaters should always be placed below fill level of container
Â
CE approved when ordered with bare wire leads
Part No. 120 VAC |
Drum Size gal (l) |
Drum Diameter in |
Drum Diameter mm |
Heater Length in (mm) |
Drum Type |
Pre-set Thermostat |
Watt Density |
Watts |
DHCS10R | 3.5 to 7 (13 to 26) | 11.1 to 12.1 | 282 to 307 | 35.0 (889) | Metal or Poly | Pre-set 85°F (29°C) | 5.0 W/in² (.078 W/cm²) | 550 |
DHCS11R | 15 to 16 (57 to 61) | 14.0 to 15.0 | 355 to 381 | 44.0 (1118) | Metal or Poly | Pre-set 85°F (29°C) | 5.0 W/in² (.078 W/cm²) | 700 |
DHCS13R | 30 (114) | 18.6 to 19.6 | 472 to 498 | 58.5 (1486) | Metal or Poly | Pre-set 85°F (29°C) | 5.0 W/in² (.078 W/cm²) | 1000 |
DHCS15R | 55 (200 to 208) | 22.3 to 23.2 | 566 to 589 | 70.0 (1778) | Metal or Poly | Pre-set 85°F (29°C) | 5.0 W/in² (.078 W/cm²) | 1200 |
Don't see your size or option?
Have a question about which BriskHeat product is right for you?
Need Application assistance? Contact Us. We are here to help!
- Monday - Friday
8:00am - 5:00pm EST
- Worldwide
1-888-412-0122