General Purpose Constant-Wattage Heating Cable (FE)
Constant Wattage Heating Cable provides a precise and constant temperature output regardless of ambient and/or surface temperature. This heating cable is ideal for a wide range of general-purpose applications, from fire protection systems to hot water lines.
- 120 V
- 8 W/ft (26 W/m)
- Stainless Steel Overbraid
Since 1949
Ideal for a Wide range of General-Purpose Applications:
- Mid-range process temperature control for food and chemical processing
- Water Lines
- Fire Protection Systems
- Fuel oil
- Condensate return
- Hot water lines
- Lines periodically purged with 250 psig steam
Note: Not suitable for installation in wet locations and outdoor use
Exposure Temperature Range: -22°F to 400°F (-30°C to 204°C)
Minimum Bend Radius: 1.0 in (25 mm)
Bus Wire Gauge: 12 AWG
Dimensions: 0.2 in x 0.3 in (5 mm x 8 mm)
Weight: 40 lb (18 kg) per 500-foot (152 m) spool
*FM Approved in Ordinary Locations
*FM Approved in Hazardous Locations:
-
- Class I Division 2 Groups B, C, D
- Class II Division 2 Groups F, G
- Class III Division 2
*CSA Approved: Tinned copper braid in ordinary locations 120, 240 VAC only
Approval valid only when used with appropriate heating cable and installation accessories, and installed in accordance with all applicable instructions, codes, and regulations.
Maximum Circuit Length in ft (m)
| Cable | 120 VAC | 208 VAC | 240 VAC | 277 VAC | 480 VAC |
| 3 watts/ft (10 watts/m) | 640 (195) | 1110 (338) | 1280 (390) | N/A | 2560 (780) |
| 5 watts/ft (16 watts/m) | 385 (117) | 665 (203) | 770 (234) | N/A | 1535 (468) |
| 8 watts/ft (26 watts/m) | 240 (73) | 415 (127) | 480 (146) | 555 (169) | 960 (293) |
| 12 watts/ft (39 watts/m) | 160 (49) | 277 (85) | 320 (98) | 370 (113) | 640 (195) |
Circuit Module Length in ft (m)
| Cable Type | 120 VAC | 208 VAC | 240 VAC | 277 VAC | 480 VAC |
| 3 watts/ft (10 watts/m) | 2.0 (0.6) | 4 (1.2) | 4 (1.2) | N/A | 8 (2.4) |
| 5 watts/ft (16 watts/m) | 2.0 (0.6) | 4 (1.2) | 3 (0.9) | N/A | 6 (1.8) |
| 8 watts/ft (26 watts/m) | 2.0 (0.6) | 4 (1.2) | 4 (1.2) | 4 (1.2) | 6 (1.8) |
| 12 watts/ft (39 watts/m) | 2.0 (0.6) | 6 (1.8) | 2 (0.6) | 4 (1.2) | 4 (1.2) |
Do I need a temperature controller with Constant Wattage Heating Tape?
Yes - BriskHeat Constant Wattage Cable should be used with an appropriate temperature controller.
What is the maximum bending radius of constant wattage cable?
The maximum bend radius for our constant wattage cable is 1” (25 mm).
How do I terminate Constant Wattage Heating Cable?
BriskHeat offers kits that include the required termination products.
How does Constant Wattage Work?