SureStart, Single Phase Compressor Soft Starters for HVAC units and heat pumps

Ordering Options:
Starting at $249.00
/ Each

Description

BriskHeat now has an easily installed, single-phase compressor soft starter for HVAC units and heat pumps. The Eltwin Hyper SureStart single-phase soft starters increase the efficiency and longevity and reduces the in-rush current needed for compressors to start, minimizing potential damage to compressors from mechanical shock hard-setting current surges.

  • Voltages Range: 110 VAC to 230 VAC
  • Start Torque Reduction: Up to 70%
  • IP Rating: IP20

Part Number

SSSP-series

Additional Features: 

  • Reduces inrush start-current by up to 70%
  • Automatically optimizes the starting current without a user interface
  • Reduces required size of back-up generators or solar power systems
  • Extends equipment life by reducing torque by up to 70%
  • Provides brownout protection
  • Protects compressors and motors from:
    • Stalling
    • Overheating
    • Contactor Arching Damage
    • Mechanical Shock
    • Motor Reversal

Contactor: Secondary
Power Supply & Control Voltage: Auto-start at power-up
Start Current Reduction: 70% (single phase); 40% (three phase)
Start Torque Reduction: Up to 70%
Starts Per Hour: 15
Short Circuit Current Rating (SCCR): 5 kA
Operating Temperature Range: -4 to 140°F (-20 to 60°C) Storage
Temperature Range: -40° to 185°F (-40 to 85°C)
Life Expectancy at Maximum Load Rate: Minimum 100,000 cycles
Dimensions: 5.30 x 2.94 x 1.96 in (135 x 75 x 50 mm)
Weight: 1.11 lb (500 g)
IP Rating: IP20

 

 

Part No. 

Nominal Voltage Rating VAC  Phase  Frequency Hz ±3% Maximum Load Amps  Maximum Starting Amps  Motor Current max FLA range  Motor Size hp  Minimum Startup Voltage  aximum High Voltage  Shutdown on Low Voltage
SS0B12-20SN 110 – 115 Single Phase 60 20 35 12 – 20 A 0.75 – 1.5 103 126 98
SS1B08-16SN 208 – 230 Single Phase 50/60 16 35 8 – 16 A 1.75 – 3.5 180 253 175
SS1B16-32SN 208 – 230 Single Phase 50/60 32 65 16 – 32 A 3.5 – 7 180 253 175
SS2A04-28SN 208 – 230 Three Phase 50/60 38 150 4 – 28 A  2 – 10 187 253 176
SS3A04-27SN 380 Three Phase 50/60 38 150 4 – 27 A 2 – 15 342 422 323
SS4A04-34SN 415 Three Phase 50 38 150 4 – 34 A  2 – 20 373 460 353
SS5A04-27SN 460 Three Phase 60 38 150 4 – 27 A 2 – 20 414 510 391

For compressors operating with 208 to 230 VAC, single phase:

Eltwin Hyper Soft Starter Single Phase Selection

Additional Notes:

For applications with 115 VAC motors, use SS0V12-20SN
For RV conditioning units operating on 120 VAC with 4-20A, use SS0C04-20RW (water proof)

Instruction Manuals
Catalog/Specifications Sheet
Application Notes
Don't see your size or option?

Have a question about which BriskHeat product is right for you?
Need Application assistance? Contact Us. We are here to help!

  • Monday - Friday

    8:00am - 5:00pm EST

  • Worldwide

    1-888-412-0122