Skip to product information
Drum Immersion Heaters (DHI)
$1,125.00
SKU:DHI120
BriskHeat Drum Immersion Heaters are easy-to-install and deliver 1,000 watts for maximum heat to your containers. With a built-in digital controller for easy programming and a 10 ft (3 m) cord and plug, this immersion heater provides simple plug-and-play operation. The Incoloy 840 heater will not corrode or contaminate your products, is grounded, and includes a 180ºF (82°C) high-limit cut-off for safety and peace of mind.
- Adjustable control - precise temperature regulation
- Can be used on poly or metal tanks/drums
- Ideal for non-acidic materials
- Suitable for use with food ingredients
Ordering Options:
Quality Guaranteed
Since 1949
Since 1949
Voltage: 120 or 240 VAC
Wattage: 1000
Flange Connection Type: 2 in (51 mm) NPT bushing
Immersion Length: 31.75 in (806 mm), from the bushing adapter
Immersion Width: 19.0 in (483 mm) heated
Temperature Range: Up to 167°F (75°C)
Temperature Display: 3-digit 0.4 in (11.1 mm) high LED
Heater Construction: Incoloy 840 (heating element), 316 SS (screw plug)
Set-point Range: 41 to 122°F (5 to 50°C)
Controller Ingress Protection Rating: IP55
Accuracy: 0.2°F (0.1°C)
Alarm: High-limit visual at 180°F (82°C)
Power Cord: 10 ft (3 m) long
- 120V includes standard 3-prong plug (NEMA 5-15)
- 240V includes bare wire leads
Note: The heating element should be fully submerged. This should not be used with most acidic or caustic liquids.
Viscosity Control
Melting Solids
Freeze Protection
Process Heating
| Part No. | Voltage | Temperature Unit Displays | Wattage | Length in (mm) |
| DHI120 | 120 | °F | 1000 | 34 (864) |
| DHI240 | 240 | °F | 1000 | 34 (864) |
| DHI240-C | 240 | °C | 1000 | 34 (864) |