Skip to product information
Silicone Rubber Hopper Heaters (SRL/SRP)
$0.00
SKU:SRL/SRP Hopper Series-RFQ
Quality Guaranteed
Since 1949
Since 1949
- Maximum exposure temperature: 450o F (232o C)
- Power density: 2.5 watts / in2 (0.004 watts / mm2)
- Moisture, chemical, and radiation resistant
- Patented 360o grounded heating element; meets NEC 427.23
- Optional high-limit safety thermostat
- Pressure sensitive adhesive (PSA) backing
- Dielectric strength: Over 2000 volts
- Choice of voltage: 120, 208, 240, 277, 480, or 600VAC single-phase
- Power leads: 12ft (3.6m) long silicone rubber power leads with bare-wire connection
- Ordinary-area location approvals:
up to 358oF (181oC)
- A temperature controller is required with this product
- Ingress Protection Rating IP56
Modular Size Chart
|
Width in (mm) |
Length in (mm) |
|
3 (76) |
12 (305) |
|
6 (152) |
12 (305) |
|
12 (305) |
12 (305) |
|
12 (305) |
24 (610) |
|
12 (305) |
36 (914) |
|
12 (305) |
48 (1220) |
Eliminate Bridging, Pluggage, Condensation, and Corrosion on:
- ESP (Electrostatic Precipitator) Hoppers
- Baghouse Hoppers
- Most Material and Dust-Collector Hoppers
Catalog/Specifications Sheet
Design Checklists
-
Hopper Heating System - Design Checklist SA-05-0028U-Hopper-Heat-System-Design-Checklist
FAQ Hopper Heating
MCH: How do these attach to hoppers?
MCH heaters are stud-welded to hoppers.
What are the standard sizes?
MCH sizes range from 3” x 12” to 12” x 48” (8cm x 30cm to 30cm x 122cm) and silicone range from 6”x6” to 24”x36” (15cm x 15cm to 61cm x 61cm).
Can I get custom sizes?
Yes.
What is the heater style for MCHs?
Heaters are cloth “pillow” designs. (Asked for assistance from J Adams)
What is the maximum operating temperature?
1000°F (538°C) for MCH and 450°F (232°C) for silicone.