Skip to product information
SpeedTrace Roof and Gutter Kits (FFRG)
$517.00
SKU:FFRG15-100
BriskHeat Speedtrace roof and gutter de-icing kits are designed to prevent the formation of ice dams on rooftops by using an electric, self-regulating heating cable system. The roof heating cables melt away excessive ice and snow from the roof, gutters, and downspouts to ensure proper drainage.
Stop roof and gutter ice today with BriskHeat! Select your configuration below; our Speedtrace cable kits are available in various lengths and voltages.
- Voltage Options: Available in 110–120 VAC and 208–277 VAC
- Complete Kit: Includes heating cable, roof clips, downspout hangers, and the cable ties needed to install your de-icing system
- Ready-to-Use: Features a pre-assembled 3-prong, grounded plug for safety and easy installation
- Compatibility: Not suitable for flat, slate, stone, ceramic, or composite tar/gravel roofs
Ordering Options:
Quality Guaranteed
Since 1949
Since 1949
Additional Features:
- Durable, long lasting professional-grade self-regulating heating cable
- Suitable for residential, commercial, adn industrial roofing applications
- Ideal for melting snow and de-icing roofs, gutters, adn downspouts
SpeedTrace can be used for a variety of heat solutions, some of which are referenced by a number of different terms; including:
- Roof De-Icing Cable
- Ice Dam Cables
- Heat Tape for Roofs
- Heat Tape for Gutters
- Roof Heat Cable
- Heat Cable for Roof
- Roof Cables
- Heat Wire for Roof
Supply Voltage: 110-120 VAC, 208-277 VAC
Nominal Wattage:
- 5 watts/ft (16 watts/m) at 50°F (10°C)
- 10 watts/ft (33 watts/m) at 32°F (0°C) in ice and snow
Minimum Exposure Temperature: -40°F (-40°C)
Maximum Exposure Temperature: 150°F (65°C)
Outer Jacket: Moisture and flame-resistant thermoplastic elastomer
Bus Wires: 16 AWG
Power Cord:
- 110-120 VAC: 6 ft (1.8 m) power cord with 3-prong grounded plug (NEMA 5-15P)
- 208-277 VAC: 2.5 ft (0.76 m) power cord with bare wire leads
Approvals:
Pipe tracing
Vessel tracing
Freeze protection
Viscosity control
Low temperature process maintenance
Roof and gutter
Ordinary locations
Hazardous locations
| Part No. 110-120 VAC | Part No. 208-277 VAC | Cable Length ft(m) | Roof Clips | Downspout Hangers | Cable Ties | Caution Labels |
| FFRG15-50 | FFRG25-50 | 50 (15.2) | 30 | 2 | 15 | 2 |
| FFRG15-75 | FFRG25-75 | 75 (22.8) | 50 | 4 | 20 | 2 |
| FFRG15-100 | FFRG25-100 | 100 (30.5) | 60 | 4 | 25 | 2 |
| FFRG15-125 | FFRG25-125 | 125 (38.1) | 80 | 4 | 30 | 2 |
| FFRG15-150 | FFRG25-150 | 150 (45.7) | 100 | 6 | 40 | 2 |
Roof Measurement
| Roof Overhang [Eave/Soffit] in (mm) | Standard Roof [M] ft (m) | Standing Seam Roof 18 in (457 mm) Seam [M] ft (m) | Standing Seam Roof 24 in (610 mm) Seam [M] ft (m) |
| None | 2.0 (0.61) | 2.5 (0.76) | 2.0 (0.61) |
| 12 (305) | 2.5 (0.85) | 2.8 (0.85) | 2.4 (0.73) |
| 24 (610) | 3.0 (0.91) | 3.6 (1.10) | 2.9 (0.88) |
| 36 (914) | 4.0 (1.21) | 4.3 (1.31) | 3.6 (1.10) |
Catalog/Specifications Sheet
Instruction Manuals
Q: What is self-regulating cable?
A: Self-regulating cable, also known as heat tape or heat trace, is a semi-flexible heating cable that automatically regulates its heat output based upon surface temperature and ambient conditions. It is often used for freeze protection applications to wrap or trace pipes, tanks, vessels, roofing and much more.
Q: What is the difference between self-regulating and constant wattage heating cable?
A: Self-regulating heating cable automatically adjusts its heat output based on the surrounding temperature. It produces more heat in colder areas and less heat in warmer areas. Constant wattage heating cable delivers the same heat output along its entire length regardless of ambient conditions.
Q: When should I use self-regulating heating cable?
A: Self-regulating heating cable is ideal for freeze protection and temperature maintenance applications where temperatures may vary along the pipe or equipment. It is commonly used for:
- Water pipes
- Process piping
- Roof and gutter de-icing
- Tanks and vessels
- Industrial freeze protection
Q: When should I use constant wattage heating cable?
A: Constant wattage heating cable is often used when a consistent heat output is required across the entire circuit. Common applications include:
Process temperature maintenance
- Long pipe runs
- Industrial equipment
- Viscosity control
- Applications with predictable heating requirements
Q: Can heating cable be used outdoors?
A: Yes. Many heating cables are designed for outdoor environments and can be used on exposed piping, tanks, valves, roofs, gutters, and process equipment. Our low temperature self-regulating heating cable, mid temperature self-regulating heating cable, high temperature constant wattage cable, and speedtrace self-regulating heating cable are suitable for outdoor use. Several constant wattage cable models are moisture and chemical resistant. Always confirm environmental ratings before installation.
Q: What voltages are available for heating cable?
A: Heating cable is available in multiple voltage options, including:
- 120V
- 208V
- 240V
- 277V
- 480V
Q: Is a temperature control needed for your Self-Regulating Heating Cable?
A: BriskHeat Self-Regulating Heating Cable should be used with an appropriate temperature controller to save energy and ensure the cable is only energized during cold periods, but it is not required. Temperature control is also necessary to maintain a specific process temperature.