Skip to product information
Silicone IBC/Tote Tank Heaters (TTH)
$1,293.00
SKU:TTH32361DK-C
BriskHeat silicone IBC tote and tank heating pad systems installs underneath plastic bladder for quick heat up time. The moisture and chemical resistant silicone heating pad is an easy-to-use non-invasive heating solution. Simple plug and play connections make this heating application ready to use out of the box to heat your tote tank.
- 1600 Watts
- 120V
Ordering Options:
Quality Guaranteed
Since 1949
Since 1949
- Quicker heat-up time due to heater having direct surface contact underneath the bladder
- Even heat distribution
- Does not contaminate or scorch your product
- Easy-to-use — simple plug-and-play design
- Reusable and rugged — long service life
- Safe — heater has unique 360° grounded heating element and cool-touch surface for your safety
Heater Construction: Multi-stranded knit and braid heating element laminated between two extra-thick layers of 20 mil fiberglass reinforced silicone rubber
Insulation: 0.25 in (6 mm) thick silicone foam
Voltage Options: 120 or 240 VAC
Operating Temperature: 0°F to 175°F (-18 to 79°C)
Maximum Exposure Temperature: 180°F (82°C)
Dielectric Strength: Over 2000 volts
Temperature Sensor: Type-K thermocouple built into heater
Heater Power Cord: 6 ft (1.8 m) long with IP67 4-pin (NEMA 6P equivalent) plug
Temperature Controller Power Cord: 6 ft (1.8 m) long
- 120 VAC: 3-prong grounded plug (NEMA 5-15P)
- 240 VAC: 3-prong grounded plug (NEMA 6-15P)
IP Rating:
- Heater: IP56
- Controller: IP64
| Part No. | Heater Size in (mm) | Volts | Watts | Part No. with °F Controller | Part No. with °C Controller | Heater Only* |
| TTH32361DK | 32 x 36 (813 x 914) |
120 | 1600 | TTH32361DK | TTH32361DK-C | TTH32361D |
| TTH32362DK | 32 x 36 (813 x 914) |
240 | 3200 | TTH32362DK | TTH32362DK-C | TTH32362D |
Catalog/Specifications Sheet
Instruction Manuals
Q: What types of container heaters are available?
A: Common container heater types include:
- Full coverage drum heaters
- Full-coverage IBC tote tank heaters
- Pail heaters
- Silicone drum and pail heaters
Q: What are container heaters used for?
A: Container heaters are commonly used to:
- Viscosity control
- Maintain process temperatures
- Protect temperature-sensitive products during storage
Q: How do container heaters improve viscosity control?
A: Heating materials to their recommended temperatures can lower viscosity, making liquids easier to pump, mix, transfer, and dispense while improving process efficiency.
Q: Can container heaters be used for hazardous locations?
A: Our ATEX Drum, Tote, and Gas Cylinder container heaters are designed and certified for hazardous locations. It is always important to verify approvals and certifications before installation in hazardous environments.
Q: Can container heaters prevent materials from freezing?
A: Yes. Container heaters are commonly used to maintain temperatures above freezing, helping protect materials from solidification, crystallization, or freeze damage during storage and use.
Q: How do I properly store my drum & tote heater?
A: We suggest that you lay your drum heater on a flat surface when not in use.
Q: What lengths and widths do tote tank heaters fit?
A: Any footprint between 40” x 40” (1016mm x 1016mm) and 48” x 48” (1219mm x 1219mm).
Q: Are there safety features for tote tank heaters like high-limit thermostats?
A: Yes, the wrap-arounds have built-in 195°F (91°C) manual reset high-limit thermostats and are grounded.
Q: Do cylinder warmers have adjustable built-in controllers?
A: No, the heaters are designed to keep the cylinders warm and temperatures will vary depending on environmental conditions. GCW and HCW heaters are built with self-regulating heat trace meaning they automatically adjust temperature depending on application and ambient conditions.
Q: Are cylinder warmers plug-and-play?
A: The 120V GCW models include a plug, but other models have ferrule-crimped leads.