Skip to product information
Low Temperature Self-Regulating Heating Cable (SLCBL)
$7.34/ft
SKU:SLCBL8120BF
BriskHeat's SLCBL is a cut-to-length, self-regulating heating cable that is an ideal solution for freeze protection and low-temperature process maintenance up to 150°F (65°C). Often referred to as self-regulating heat trace cable, it automatically adjusts its heat output based on surface and ambient temperatures.
Note: Special consideration must be given to the circuit breaker selection due to high initial in-rush currents.
Jacket Configurations:
B: Tinned copper metal braid for dry environments
BP: Tinned copper metal braid with a thermoplastic elastomer overjacket for wet or mildly corrosive environments
BF: Tinned copper metal braid with a fluoropolymer overjacket for wet or harsh chemical environments
Ordering Options:
Quality Guaranteed
Since 1949
Since 1949
Maximum Continuous Maintenance Temperature: 150°F (65°C)
Intermittent Exposure Temperature Range: -40°F to 185°F (-40°C to 85°C)
Supply Voltage: 110-120 VAC or 208-277 VAC
Nominal Power Output at 50°F (10°C):
- 3, 5, 8, 10, 12 watts/ft (10, 16, 26, 33, 39 watts/m)
- For 208 and 277 VAC, adjust watts shown for the 240 VAC cable using the Voltage Adjustment Factors chart
Bus Wire Gauge: 16 AWG
Braid Resistance: Tinned copper 0.0055 ohms/ft (0.0182 ohms/m)
T-Rating:
- T6: 3, 5, 8, 10 watts/ft (10, 16, 26, 33 watts/m)
- T5: 12 watts/ft (39 watts/m)
Bend Radius: 0.5 in (12 mm)
Approvals:
Ordinary Locations -B, -BP Series Only
Embedded de-icing and snow melting systems -BP Series only
Roof and gutter de-icing and snow melting systems -BP series only
Ordinary Locations
Hazardous (Classified) Locations
Class I, Division 2, Groups A, B, C, D
Class II, Division 2, Groups E, F, G
Class III
Ordinary Locations -B, -BP Series Only Embedded de-icing and snow melting systems -BP Series only
Roof and gutter de-icing and snow melting systems -BP series only
Ordinary Locations Hazardous (Classified) Locations
Class I, Division 2, Groups A, B, C, D
Class II, Division 2, Groups E, F, G
Class III
Approvals valid only when used with appropriate heating cable and installation accessories, and installed in accordance with all applicable instructions, codes, and regulations.
Pipe tracing
Vessel tracing
Freeze protection
Viscosity control
Low temperature process maintenance
Roof and gutter
Ordinary locations
Hazardous locations
|
Product Type |
Description |
Nominal Dimensions |
Shipping Weight 500-ft (152m) spool |
Purpose |
|
SLCBL-B |
Tinned Copper Metal Braid |
0.17” x 0.43” (4.4mm x 11.0mm) |
35 lb. (16 kg) |
Dry |
|
SLCBL-BP |
Tinned Copper Metal Braid with Thermoplastic Elastomer Overjacket |
0.23” x 0.50” (6.0mm x 12.6mm) |
46 lb. (21 kg) |
Wet or Weak |
|
SLCBL-BF |
Tinned Copper Metal Braid with Fluoropolymer Overjacket |
0.21” x 0.47” (5.4mm x 12.0mm) |
44 lb. (20 kg) |
Wet or Harsh |
Catalog/Specifications Sheet
Warranties
Q: What is self-regulating cable?
A:: Self-regulating cable, also known as heat tape or heat trace, is a semi-flexible heating cable that automatically regulates its heat output based upon surface temperature and ambient conditions. It is often used for freeze protection applications to wrap or trace pipes, tanks, vessels, roofing and much more.
Q: What is the difference between self-regulating and constant wattage heating cable?
A:: Self-regulating heating cable automatically adjusts its heat output based on the surrounding temperature. It produces more heat in colder areas and less heat in warmer areas. Constant wattage heating cable delivers the same heat output along its entire length regardless of ambient conditions.
Q: When should I use self-regulating heating cable?
A:: Self-regulating heating cable is ideal for freeze protection and temperature maintenance applications where temperatures may vary along the pipe or equipment. It is commonly used for:
- Water pipes
- Process piping
- Roof and gutter de-icing
- Tanks and vessels
- Industrial freeze protection
Q: When should I use constant wattage heating cable?
A:: Constant wattage heating cable is often used when a consistent heat output is required across the entire circuit. Common applications include:
Process temperature maintenance
- Long pipe runs
- Industrial equipment
- Viscosity control
- Applications with predictable heating requirements
Q: Can heating cable be used outdoors?
A:: Yes. Many heating cables are designed for outdoor environments and can be used on exposed piping, tanks, valves, roofs, gutters, and process equipment. Our low temperature self-regulating heating cable, mid temperature self-regulating heating cable, high temperature constant wattage cable, and speedtrace self-regulating heating cable are suitable for outdoor use. Several constant wattage cable models are moisture and chemical resistant. Always confirm environmental ratings before installation.
Q: What voltages are available for heating cable?
A:: Heating cable is available in multiple voltage options, including:
- 120V
- 208V
- 240V
- 277V
- 480V
Q: Is a temperature control needed for your Self-Regulating Heating Cable?
A:: BriskHeat Self-Regulating Heating Cable should be used with an appropriate temperature controller to save energy and ensure the cable is only energized during cold periods, but it is not required. Temperature control is also necessary to maintain a specific process temperature.