Skip to product information
End of Circuit LED Monitor Light Kits (JHE)
$298.00
SKU:JHE-LR-GET
BriskHeat JHE series end of circuit LED monitor light kits provide the ideal visual monitoring solution when managing extended runs of self-regulating heat trace cable. This high-profile, ruggedly designed indicator light features 360° visibility to verify voltage presence at the furthest end of the circuit. Utilizing a super-bright green or red LED, it gives field operators immediate visual confirmation that the heat trace cable is energized and functional. Each comprehensive kit contains all necessary components to complete one end-of-circuit LED monitor light and end-seal termination.
- 360° High-Visibility Status: Features a raised, high-profile dome design that ensures the bright LED indicator can be easily seen from any angle in complex industrial piping layouts.
- Instant Voltage Verification: Provides real-time operational status, instantly alerting maintenance teams if power is lost at the end of a heat trace run due to a cable break or electrical fault.
-
All-In-One Termination Kit: Supplies all required mechanical stands, industrial sealants, hardware, and labels needed for a robust, moisture-resistant end-of-line installation.
Ordering Options:
Quality Guaranteed
Since 1949
Since 1949
Maximum Voltage: 240 VAC
Maximum Current: 32 amps
Lumen Output: 10 lumens
Construction: Non-conductive FRP plastic body
Overall Height: 8.2 in (208 mm)
Maximum Continuous Exposure Temperature (T5): 212°F (100°C)
Ambient Exposure Temperature Range: -40°F to 149°F (-40°C to 65°C)
IP Rating: IP66/NEMA 4X
Approvals:
Ordinary Locations (with SLCBL heating cables)
Hazardous (Classified) Locations (with SLCBL heating cable only):
Class I, Division 2, Groups A, B, C, D
Class II, Division 2, Groups E, F, G
Class III
T5: 3, 5, 8 watts/ft (10, 16, 26 watts/m). T6: 10 watts/ft (33 watts/m)
Ordinary Locations (with SLCBL heating cables)Hazardous (Classified) Locations (with SLCBL heating cable only):
Class I, Division 2, Groups A, B, C, D
Class II, Division 2, Groups E, F, G
Class III
T5: 3, 5, 8 watts/ft (10, 16, 26 watts/m). T6: 10 watts/ft (33 watts/m)
Approvals valid only when used with appropriate heating cable and installation accessories, and installed in accordance with all applicable instructions, codes, and regulations.
| Part No. | Color | Compatible With | Enough to Complete | Kit Contents |
|---|---|---|---|---|
| JHE-LG-GET | Green | CSA Approved for SLCBL Heating Cable. Not CSA Approved for SLMCBL/SLHCBL/SLCAB/SLMCAB Heating Cable. | One end of circuit LED monitor light end seal termination. |
|
| JHE-LR-GET | Red | CSA Approved for SLCBL Heating Cable. Not CSA Approved for SLMCBL/SLHCBL/SLCAB/SLMCAB Heating Cable. | One end of circuit LED monitor light end seal termination. |
|
Instruction Manuals
Catalog/Specifications Sheet
Q: What is self-regulating cable?
A:: Self-regulating cable, also known as heat tape or heat trace, is a semi-flexible heating cable that automatically regulates its heat output based upon surface temperature and ambient conditions. It is often used for freeze protection applications to wrap or trace pipes, tanks, vessels, roofing and much more.
Q: What is the difference between self-regulating and constant wattage heating cable?
A:: Self-regulating heating cable automatically adjusts its heat output based on the surrounding temperature. It produces more heat in colder areas and less heat in warmer areas. Constant wattage heating cable delivers the same heat output along its entire length regardless of ambient conditions.
Q: When should I use self-regulating heating cable?
A:: Self-regulating heating cable is ideal for freeze protection and temperature maintenance applications where temperatures may vary along the pipe or equipment. It is commonly used for:
- Water pipes
- Process piping
- Roof and gutter de-icing
- Tanks and vessels
- Industrial freeze protection
Q: When should I use constant wattage heating cable?
A:: Constant wattage heating cable is often used when a consistent heat output is required across the entire circuit. Common applications include:
Process temperature maintenance
- Long pipe runs
- Industrial equipment
- Viscosity control
- Applications with predictable heating requirements
Q: Can heating cable be used outdoors?
A:: Yes. Many heating cables are designed for outdoor environments and can be used on exposed piping, tanks, valves, roofs, gutters, and process equipment. Our low temperature self-regulating heating cable, mid temperature self-regulating heating cable, high temperature constant wattage cable, and speedtrace self-regulating heating cable are suitable for outdoor use. Several constant wattage cable models are moisture and chemical resistant. Always confirm environmental ratings before installation.
Q: What voltages are available for heating cable?
A:: Heating cable is available in multiple voltage options, including:
- 120V
- 208V
- 240V
- 277V
- 480V
Q: Is a temperature control needed for your Self-Regulating Heating Cable?
A:: BriskHeat Self-Regulating Heating Cable should be used with an appropriate temperature controller to save energy and ensure the cable is only energized during cold periods, but it is not required. Temperature control is also necessary to maintain a specific process temperature.