48" High IBC Tote Tank Heater 120V 1440W Up to 160F

Additional Features: 

• Insulated, full coverage design
• Adjustable thermostat control - up to 160°F (71°C)
• Two seperate heat zones allows users to adjust heater ouput as content levels decrease
• Even heat distribution and maximum energy efficiency
• Does not contaminate or scorch your product
• Easy to use - plug-and-play design
• Reusable and rugged for long service life

Outer Material: Silicone impregnated cloth
Insulation: 0.25 in (6 mm) thick fiberglass
Height: 48 in (1220 mm)
Circumference: Fits any vessel from 160 in (4064 mm) to 192 in (4877 mm)
Closure Method: Adjustable nylon straps with buckles (two across the top  and three around the tank)
Voltage Options: 120V
Operating Temperature: Adjustable up to 160°F (71°C)
Maximum Exposure Temperature: 500°F (260°C)
Built-in High-Limit Safety Thermostat: Manual reset 195°F (91°C) Heating Element: 360° grounded heating element for your Safety Dielectric Strength: Over 2000 volts
Power Cord: 6 ft (1.8 m) long

• • 120 VAC: 3-prong grounded plug (NEMA 5-15P)

IP Rating: IP2X

CE Approved when ordered with crimped ferrule lead option

How to Measure Your Tote Tank / Intermediate Bulk Container / IBC

1. Measure the height of the tote tank / IBC not including the pallet or support stand.   ________   (Height)
2. Measure the length and width of the tank. This determines the tank perimeter for the heated area.

______(Tank Length) X 2    +  ______(Tank Width) X 2 = ________ (Perimeter)

Note: If heater length measurement is below 160" (4064mm) or above 192" (4877mm), contact factory for heater recommendation