Economy-Series - Silicone Rubber Heating Blankets (SRW) - BriskHeat

Power density: 5.0 W/in² (0.78 W/cm²) stocked; Density options from 0.5 W/in² (0.08 W/cm²) to 25 W/in² (3.9 W/cm²)

Voltage options: 120 VAC and 240 VAC stocked; 12 VDC to 480 VAC available.

Wattage tolerance: +5%/-10%

Exposure temperature: -60°F to 450°F (-51°C to 232°C)

Minimum Bend Radius: 2 in (51 mm)

Nominal Thickness: 0.06 in (1.5 mm)

Power leads: 10 in (25 cm) PFA 22 ga. with bare wire (no plug); Other lengths offered.

Built-in Thermostat Options:

• 35°F/55°F (2°C/13°C)
• 170°F/200°F (77°C/93°C)
• 80°F/110°F (27°C/43°C)
• 270°F/300°F 132°C/149°C
• 145°F/175°F, 63°C/79°)
• Adj. 25°F to 330°F (-4°C to 116°C)

Lead terminations: Insulated terminals or spade lugs, crimp connectors, standard plugs, mini connectors, twist lock plugs, stripped ends

Lead protection: Heat shrink, silicone sleeving, SS braid, SS conduit

Mounting: Boot hooks and lace, D-rings, springs and grommets, snap fasteners, high-temp rubber rings, hook and loop (like Velcro)

Silicone rubber sponge insulation: 1/16 in, 1/8 in, 1/4 in, 3/8 in, or 1/2 in (1.6 mm, 3.2 mm, 6.4 mm, 9.5 mm, 12.7 mm) closed cell foam can be bonded to the heater. Rated to 450°F (232°C).

• Holes and cut-outs
• Unique shapes and sizes
• Pressure sensitive adhesive
• Lead exit locations
• Built-in thermocouples
• Ground braid mesh
• Dual voltage
• Three-phase
• High-limit thermostats
• Lead caps

**Custom blankets normally ship within 2 weeks. Expedites to 1 day available for most custom heaters.