SDX Digital PID Controller with HTC Heating Cord

Value-Priced Bundles: Save $ by ordering these heaters and temperature controllers together

HTC Heating Cord

• Heating cords designed for use on small tubes, vessels, or any application where space is limited.
• Maximum exposure temperature:
  Removable & Reusable Use: Up to 572°F (300°C)
  Single Install Use: Up to 932°F (500°C)
• Extremely flexible heating cords can be wrapped around objects as small as 1/8" (3mm) diameter.
• Rapid thermal response provides accurate heat when you need it.
• Multi-stranded resistance wire heating element provides exceptional flexibility and durability.
• Fiberglass outer sheath provides electrical insulation for safe use with electrically conductive surfaces.
• Available in a wide variety of length and width configurations.
• Ideal for laboratory, R&D, gas tubing, production, maintenance, temporary heat, and more.
• Safe for use with glass and electrically conductive metal surfaces.
• Choice of power leads on same end or opposite ends to suit your electrical needs.
• Includes 9" (230mm) long high temperature tie downs for safe and easy installation.
• Temperature controller is required for safe operation of this product.
• Built-in split-plug design easily connects to your choice of temperature controlling device.

SDX Digital Benchtop Temperature Controller

• 4-Key touch pad interface
• Advanced PID control
• Programmable for On/Off Control
• Indoor use
• Plug & Play design
• Power On/Off button
• Power cord plugs and sensors to meet individual needs
• Programmable in both °F and °C
• Includes C14 Plug for wiring to heater
• Benchtop design

BIH Heating Tape

• Maximum exposure temperature
  Removable & Reusable Use: Up to 572°F (300°C)
  Single Install Use: Up to 932°F (500°C)
• Diameter: 3/16” (4.8mm)
• Construction:
  • Fiberglass knit and braided heating element
  • Fiberglass knit and braided outer sheath
• Power density:
  • Standard: 21 W/in(68 W/m)
• 24" (610mm) power leads with:
  • 120VAC: Separable 2-prong split-plug (NEMA 1-15)
  • 240VAC: Crimped ferrule wire connection
• 

SDX Digital Benchtop Temperature Controller

• Voltage: 100 – 240 VAC
• Max. Amp Load: 15 Amp North America; 10 Amp Europe
• Temperature Control Range: 0°F to 999°F and 0°C to 999°C
• Temperature Display Units: °F and °C
• Sensor, 5 ft (1.5 m) included: Type-J or Type-K Thermocouple, or PT100-RTD
• Accuracy: +/-0.5% span +/- 1 digit at 77°F (25°C)
• Alarms: Audible; Programmable for high or low absolute, or deviation
• Input Power Cord/Connections: 79 in (2 m) long with input power plug based on model
• Output Power Cord/Connection: C13 receptacle with mating C14 plug
• Special Features: Digital PID with Autotuning
• Environmental Exposures:
• Operating range: 32°F to 111°F (0°C to 44°C)
• Storage range: -4°F to 158°F (-20°C to 70°C)
• Relative humidity: < 95% non-condensing temperatures
• Enclosure Dimensions:
• 6.4 in x 2.6 in x 9.5 in
• (162 mm x 66 mm x 241 mm)
• Enclosure Rating/Classification Designation:
  NEMA1; IP30

All safety-critical components, enclosures and materials used in the manufacture of this product are UL Listed/Recognized and suitably rated for the intended application.