ACR3 Hot Bonder

• Controls both heat and vacuum — Ideal solution for localized, on-the-spot composite curing, metal bonding, and ‘out-of-autoclave / oven’ processing applications
• Intuitive graphical touchscreen interface is easy-to-program and use
• Compact size allows users to easily transport hot bonder from job-to-job
• Completely self-contained and portable with built-in vacuum pump
• Secure — multiple levels of password protection
• Transfer your programs quickly from one bonder to another
• Simple post-cure data transfer and analysis — files can be transferred easily with USB drive and opened with spreadsheet and word processor programs including Microsoft® Excel® and Word®
• Rugged — hot bonder is enclosed in extra durable, high-impact hard case
• Multi-language support including English, German, Russian, and Chinese (Mandarin). Additional languages available upon request
• Update your hot bonder easily with the latest FREE software at www.BriskHeat.com
• 3 Year Warranty

• Full-color touchscreen interface
• Dual vacuum system — built-in electric pump and vacuum venturi for each zone
• Single or dual zone
• 30 amp output per heat zone
• 10 thermocouple sensors per zone
• Audible and visual alarms for high and low temperature / vacuum limits
• Data logs digitally or through built-in printers
• Fast and simple data transfer with USB drive
• Includes everything you need

General
Display: 8.4 in (213 mm) full-color touchscreen
Temperature Control Range: Up to 1400°F (760°C)
Temperature Display Units: °F or °C
Sensor Input: Type-J Thermocouples with mini connectors — 10 inputs per zone
Accuracy: ±3°F (1.67°C)
Temperature Measurement Source: Choice of average of all selected thermocouples
(TCs), high TC, low TC, or one selected TC
Dimensions (Closed): Hot Bonder: 22 x 18 x 10 in (559 x 457 x 254 mm); Accessory Case: 19 x 15 x 7 in (483 x 381 x 178 mm)
Weight (Hot Bonder): Single Zone: 39 lbs (18 kg); Dual Zone: 48 lbs (22 kg)
Alarms: Audible and visual alarms for high and low temperture/vacuum limits
Data Storage: Stores up to 30 programs and last 12 cures on unit
Data Transfer: Through USB port — USB flash drive included
Data Logging: Logs digitally or through built-in printer: prints and records real-time status of cure including program parameters
Data Logging Intervals: 1 to 99 minutes
Security: Multiple levels of password protection

Power
Input Voltage: 100-130 VAC, 200-240 VAC
Maximum Amp Load per Zone: 30 amps
Frequency: 50-60 Hz
Ground Fault Protection: Input ground fault interrupter breaker protected
MAINS Supply Voltage Fluctuations: up to ±10% of the nominal voltage
Transient Over Voltages: Typically found on a Category II power source: i.e. a lighting circuit Input Power Cord: 10 ft (3 m) long with choice of plug (1 per zone)
Heater Output Cord: 5 ft (1.5 m) long with receptacle compatible with BriskHeat Composite Curing Heating Blankets with ‘C’ plug. — Other heater output cords available upon request

Vacuum
Vacuum System: Built-in electric vacuum pump and vacuum venturi for each zone
Pressure: 28 inHg (711 mmHg)
Flow: 5.7 scfm (vacuum venturi); 0.9 scfm (electric vacuum pump)
Vacuum Units: Programmable to inHg or mmHg
Vaccum Adjustment: Ability to manually adjust pressure for each zone

Environment
Location: Intended for use in dry environments. Do not expose to wet spray.
Altitude: up to 6,562 ft (2,000 m)
Storage Temperature Range: -4 to 140°F (-20 to 60°C)
Operating Temperature Range: 41 to 104°F (5 to 40°C)
Maximum Relative Humidity: 80% for temperatures up to 88°F (31°C) decreasing linearly to 50% relative to humidity at 104°F (40°C)
Pollution Degree: 2 — normally only non-conductive pollution occurs, however a temporary conductivity caused by condensation must be expected

The ACR ^® 3 Hot Bonder can be purchased either with or without heaters.

ACR ^® 3 Base Unit Hot Bonder Kit includes:

• ACR ^® 3 hot bonder unit
• 10ft (3m) vacuum hoses (2 per zone)
• 10ft (3m) input power cord (1 per zone)
• 5ft (1.5m) heater output power cord (1 per zone)
• USB flash disk
• J-type thermocouples (10 per zone)
• Standard connector adapters for thermocouple receptacles (10 per zone)
• Vacuum bag feed-throughs (2 per zone)
• Extra printer ribbon and paper (1 per zone)
• DVD Training Video

ACR ^® 3 Hot Bonder Kit with Heaters includes:

• ACR ^® 3 hot bonder unit
• One 10" x 10" (254 x 254mm) SR composite heat curing blanket per zone
• One 12" x 12" (305 x 305mm) SR composite heat curing blanket per zone
• One 16" x 16" (406 x 406mm) SR composite heat curing blanket per zone
• 10ft (3m) vacuum hoses (2 per zone)
• 10ft (3m) input power cord (1 per zone)
• 5ft (1.5m) heater output power cord (1 per zone)
• USB flash disk
• J-type thermocouples (10 per zone)
• Standard connector adapters for thermocouple receptacles (10 per zone)
• Vacuum bag feed-throughs (2 per zone)
• Extra printer ribbon and paper (1 per zone)
• DVD Training Video

 *Please indicate voltage when ordering with NSN.