SDX Digital PID Controller with HWC Heating Cord
Description
SDX Digital PID Temperature Controller with HWC Heating Cord (Special Bundle Price)
Configuration Options
NOTE: Selecting Configuration Options limit / refine the available products; to match your selection criteria.
Value-Priced Bundles: Save $ by ordering these heaters and temperature controllers together
HWC Heating Cord
- Rapid thermal response provides accurate heat when you need it.
- Maximum exposure temperature:
Removable & Reusable Use: Up to 572°F (300°C)
Single Install Use: Up to 932°F (500°C) - Multi-stranded resistance wire heating element provides exceptional flexibility and durability.
- Samox® outer sheath provides electrical insulation for safe use with electrically conductive surfaces.
- Available in a wide variety of length and width configurations.
- Ideal for laboratory, R&D, gas tubing, production, maintenance, temporary heat, and more.
- Safe for use with glass and electrically conductive metal surfaces.
- Choice of power leads on same end or opposite ends to suit your electrical needs.
- Double braided fiberglass outer sheath
- Includes 9" (230mm) long high temperature tie downs for safe and easy installation.
- Temperature controller is required for safe operation of this product.
- Built-in split-plug design easily connects to your choice of temperature controlling device.
SDX Digital Benchtop Temperature Controller
- 4-Key touch pad interface
- Advanced PID control
- Programmable for On/Off Control
- Indoor use
- Plug & Play design
- Power On/Off button
- Power cord plugs and sensors to meet individual needs
- Programmable in both °F and °C
- Includes C14 Plug for wiring to heater
- Benchtop design
BIH Heating Tape
- Maximum exposure temperature:
Removable & Reusable Use: Up to 572°F (300°C)
Single Install Use: Up to 932°F (500°C) - Diameter: 3/16” (4.8mm)
- Construction:
- Fiberglass knit and braided heating element
- Fiberglass knit and braided outer sheath
- Power density:
- Standard: 21 W/in(68 W/m)
- 24" (610mm) power leads with:
- 120VAC: Separable 2-prong split-plug (NEMA 1-15)
- 240VAC: Crimped ferrule wire connection
SDX Digital Benchtop Temperature Controller
- Voltage: 100 – 240 VAC
- Max. Amp Load: 15 Amp North America; 10 Amp Europe
- Temperature Control Range: 0°F to 999°F and 0°C to 999°C
- Temperature Display Units: °F and °C
- Sensor, 5 ft (1.5 m) included: Type-J or Type-K Thermocouple, or PT100-RTD
- Accuracy: +/-0.5% span +/- 1 digit at 77°F (25°C)
- Alarms: Audible; Programmable for high or low absolute, or deviation
- Input Power Cord/Connections: 79 in (2 m) long with input power plug based on model
- Output Power Cord/Connection: C13 receptacle with mating C14 plug
- Special Features: Digital PID with Autotuning
- Environmental Exposures:
- Operating range: 32°F to 111°F (0°C to 44°C)
- Storage range: -4°F to 158°F (-20°C to 70°C)
- Relative humidity: < 95% non-condensing temperatures
- Enclosure Dimensions:
- 6.4 in x 2.6 in x 9.5 in
- (162 mm x 66 mm x 241 mm)
- Enclosure Rating/Classification Designation:
NEMA1; IP30
All safety-critical components, enclosures and materials used in the manufacture of this product are UL Listed/Recognized and suitably rated for the intended application.
PART NUMBER | VOLTAGE | LENGTH | WATTAGE | POWER PLUG TYPE | SENSOR TYPE |
---|---|---|---|---|---|
SDXJA-HWC1040 | 120 | 4 ft (1.2 m) | 266 | NEMA 5-15 | J-Type Thermocouple |
SDXRA-HWC1120 | 120 | 12 ft (3.7 m) | 750 | NEMA 5-15 | PT100/RTD |
SDXKA-HWC1180 | 120 | 18 ft (5.5 m) | 1000 | NEMA 5-15 | K-Type Thermocouple |
SDXKA-HWC1040 | 120 | 4 ft (1.2 m) | 266 | NEMA 5-15 | K-Type Thermocouple |
SDXJA-HWC1060 | 120 | 6 ft (1.8 m) | 350 | NEMA 5-15 | J-Type Thermocouple |
SDXRA-HWC1180 | 120 | 18 ft (5.5 m) | 1000 | NEMA 5-15 | PT100/RTD |
SDXRA-HWC1040 | 120 | 4 ft (1.2 m) | 266 | NEMA 5-15 | PT100/RTD |
SDXKA-HWC1060 | 120 | 6 ft (1.8 m) | 350 | NEMA 5-15 | K-Type Thermocouple |
SDXJA-HWC1120 | 120 | 12 ft (3.7 m) | 750 | NEMA 5-15 | J-Type Thermocouple |
SDXRA-HWC1060 | 120 | 6 ft (1.8 m) | 350 | NEMA 5-15 | PT100/RTD |
SDXKA-HWC1120 | 120 | 12 ft (3.7 m) | 750 | NEMA 5-15 | K-Type Thermocouple |
SDXJA-HWC1180 | 120 | 18 ft (5.5 m) | 1000 | NEMA 5-15 | J-Type Thermocouple |
Don't see your size or option?
Have a question about which BriskHeat product is right for you?
Need Application assistance? Contact Us. We are here to help!
- Monday - Friday
8:00am - 5:00pm EST
- Worldwide
1-888-412-0122