Silicone Rubber Hopper Heaters (SRL/SRP)
Description
Part Number
- Ideal for ESP (Electrostatic Precipitator) hoppers, baghouse hoppers, and material and dust-collector hoppers
- System of modular heaters meets your heat-up and total wattage requirements
- Easy adhesive installation
- Exceptional durability
- 5-year warranty
- Optional hazardous-area approval:
- Class I Division 2 Groups A, B, C, and D
Class II Division 2 Groups F and G
BriskHeat has an entire team of heating experts assigned to each application. In order for us to provide the best solution, please
- Complete the Hopper Heating System Design Checklist
- Contact us or your local representative for a quotation and application assistance
- Maximum exposure temperature: 450o F (232o C)
- Power density: 2.5 watts / in2 (0.004 watts / mm2)
- Moisture, chemical, and radiation resistant
- Patented 360o grounded heating element; meets NEC 427.23
- Optional high-limit safety thermostat
- Pressure sensitive adhesive (PSA) backing
- Dielectric strength: Over 2000 volts
- Choice of voltage: 120, 208, 240, 277, 480, or 600VAC single-phase
- Power leads: 12ft (3.6m) long silicone rubber power leads with bare-wire connection
- Ordinary-area location approvals:
- up to 358oF (181oC)
- 73/23/EEC
- A temperature controller is required with this product
- Ingress Protection Rating IP56
Modular Size Chart
Width in (mm) |
Length in (mm) |
3 (76) |
12 (305) |
6 (152) |
12 (305) |
12 (305) |
12 (305) |
12 (305) |
24 (610) |
12 (305) |
36 (914) |
12 (305) |
48 (1220) |
Eliminate Bridging, Pluggage, Condensation, and Corrosion on:
- ESP (Electrostatic Precipitator) Hoppers
- Baghouse Hoppers
- Most Material and Dust-Collector Hoppers
FAQ Hopper Heating
MCH: How do these attach to hoppers?
MCH heaters are stud-welded to hoppers.
What are the standard sizes?
MCH sizes range from 3” x 12” to 12” x 48” (8cm x 30cm to 30cm x 122cm) and silicone range from 6”x6” to 24”x36” (15cm x 15cm to 61cm x 61cm).
Can I get custom sizes?
Yes.
What is the heater style for MCHs?
Heaters are cloth “pillow” designs. (Asked for assistance from J Adams)
What is the maximum operating temperature?
1000°F (538°C) for MCH and 450°F (232°C) for silicone.
Don't see your size or option?
Have a question about which BriskHeat product is right for you?
Need Application assistance? Contact Us. We are here to help!
- Monday - Friday
8:00am - 5:00pm EST
- Worldwide
1-888-412-0122
- Email Us