High Wattage Heavy Insulated Heating Tape (BWH) With PID Temperature Controller Bundle (SDX)
Description
Save money by ordering these heaters and temperature controllers together
- Maximum exposures temperature:
- Removable & Reusable Use: Up to 572°F (300°C)
- Single Install Use: Up to 932°F (500°C)
- PID Controller
Configuration Options
NOTE: Selecting Configuration Options limit / refine the available products; to match your selection criteria.
High Wattage Heavy Insulated Heating Tape (BWH)>
- Maximum exposures temperature:
- Removable & Reusable Use: Up to 572°F (300°C)
- Single Install Use: Up to 932°F (500°C)
- Multi-stranded resistance wire heating element provides exceptional flexibility and durability.
- Samox® outer sheath provides electrical insulation for safe use with electrically conductive surfaces.
- Rapid thermal response provides accurate heat when you need it.
- Available in a wide variety of length and width configurations.
- Ideal for laboratory heating applications for apparatus, gas tubing, temporary heat, valves, and more.
- Safe for use with glass and electrically conductive metal surfaces.
- Includes 9" (230mm) long high temperature tie downs for safe and easy installation.
- Temperature controller is required for safe operation of this product.
- Built-in split-plug design easily connects to your choice of temperature controlling device.
SDX Digital Benchtop Temperature Controller
- 4-Key touch pad interface
- Advanced PID control
- Programmable for On/Off Control
- Indoor use
- Plug & Play design
- Power On/Off button
- Power cord plugs and sensors to meet individual needs
- Programmable in both °F and °C
- Includes C14 Plug for wiring to heater
- Benchtop design
High Wattage Heavy Insulated Heating Tape (BWH)
- Maximum exposures temperature:
- Removable & Reusable Use: Up to 572°F (300°C)
- Single Install Use: Up to 932°F (500°C)
- Construction:
- Samox® knit and braided heating element
- Samox® knit and braided outer sheath
- Power density:
- Standard: 13.1 W/in2 (0.020 W/mm2 )
- Wide† : 7.7 W/in2 (0.012 W/mm2)
- 24" (610mm) power leads with:
- 120VAC: Separable 2-prong split-plug (NEMA 1-15)
- 240VAC: Bare wire connection
SDX Digital Benchtop Temperature Controller
- Voltage: 100 – 240 VAC
- Max. Amp Load: 15 Amp North America; 10 Amp Europe
- Temperature Control Range: 0°F to 999°F and 0°C to 999°C
- Temperature Display Units: °F and °C
- Sensor, 5 ft (1.5 m) included: Type-J or Type-K Thermocouple, or PT100-RTD
- Accuracy: +/-0.5% span +/- 1 digit at 77°F (25°C)
- Alarms: Audible; Programmable for high or low absolute, or deviation
- Input Power Cord/Connections: 79 in (2 m) long with input power plug based on model
- Output Power Cord/Connection: C13 receptacle with mating C14 plug
- Special Features: Digital PID with Autotuning
- Environmental Exposures:
- Operating range: 32°F to 111°F (0°C to 44°C)
- Storage range: -4°F to 158°F (-20°C to 70°C)
- Relative humidity: < 95% non-condensing temperatures
- Enclosure Dimensions:
- 6.4 in x 2.6 in x 9.5 in
- (162 mm x 66 mm x 241 mm)
- Enclosure Rating/Classification Designation:
NEMA1; IP30
| PART NUMBER | VOLTAGE | WIDTH | LENGTH | WATTAGE | POWER PLUG TYPE | SENSOR TYPE |
|---|---|---|---|---|---|---|
| SDXKA-BWH101040LD | 120 | 1.00 in (25 mm) | 4 ft (1.2 m) | 624 | NEMA 5-15 | K-Type Thermocouple |
| SDXKA-BWH051080LD | 120 | 0.50 in (13 mm) | 8 ft (2.4 m) | 624 | NEMA 5-15 | K-Type Thermocouple |
| SDXKA-BWH051020LD | 120 | 0.50 in (13 mm) | 2 ft (0.6 m) | 156 | NEMA 5-15 | K-Type Thermocouple |
| SDXJA-BWH101020LD | 120 | 1.00 in (25 mm) | 2 ft (0.6 m) | 312 | NEMA 5-15 | J-Type Thermocouple |
| SDXRA-BWH101020LD | 120 | 1.00 in (25 mm) | 2 ft (0.6 m) | 312 | NEMA 5-15 | PT100/RTD |
| SDXRA-BWH051060LD | 120 | 0.50 in (13 mm) | 6 ft (1.8 m) | 468 | NEMA 5-15 | PT100/RTD |
| SDXKA-BWH101060LD | 120 | 1.00 in (25 mm) | 6 ft (1.8 m) | 936 | NEMA 5-15 | K-Type Thermocouple |
| SDXKA-BWH051100LD | 120 | 0.50 in (13 mm) | 10 ft (3.0 m) | 780 | NEMA 5-15 | K-Type Thermocouple |
| SDXKA-BWH051040LD | 120 | 0.50 in (13 mm) | 4 ft (1.2 m) | 312 | NEMA 5-15 | K-Type Thermocouple |
| SDXJA-BWH101040LD | 120 | 1.00 in (25 mm) | 4 ft (1.2 m) | 624 | NEMA 5-15 | J-Type Thermocouple |
| SDXRA-BWH101040LD | 120 | 1.00 in (25 mm) | 4 ft (1.2 m) | 624 | NEMA 5-15 | PT100/RTD |
| SDXRA-BWH051080LD | 120 | 0.50 in (13 mm) | 8 ft (2.4 m) | 624 | NEMA 5-15 | PT100/RTD |
| SDXRA-BWH051020LD | 120 | 0.50 in (13 mm) | 2 ft (0.6 m) | 156 | NEMA 5-15 | PT100/RTD |
| SDXKA-BWH101020LD | 120 | 1.00 in (25 mm) | 2 ft (0.6 m) | 312 | NEMA 5-15 | K-Type Thermocouple |
| SDXKA-BWH051060LD | 120 | 0.50 in (13 mm) | 6 ft (1.8 m) | 468 | NEMA 5-15 | K-Type Thermocouple |
| SDXJA-BWH101060LD | 120 | 1.00 in (25 mm) | 6 ft (1.8 m) | 936 | NEMA 5-15 | J-Type Thermocouple |
| SDXRA-BWH101060LD | 120 | 1.00 in (25 mm) | 6 ft (1.8 m) | 936 | NEMA 5-15 | PT100/RTD |
| SDXJA-BWH051100LD | 120 | 0.50 in (13 mm) | 10 ft (3.0 m) | 780 | NEMA 5-15 | J-Type Thermocouple |
| SDXRA-BWH051100LD | 120 | 0.50 in (13 mm) | 10 ft (3.0 m) | 780 | NEMA 5-15 | PT100/RTD |
| SDXRA-BWH051040LD | 120 | 0.50 in (13 mm) | 4 ft (1.2 m) | 312 | NEMA 5-15 | PT100/RTD |
Design Checklists
Don't see your size or option?
Have a question about which BriskHeat product is right for you?
Need Application assistance? Contact Us. We are here to help!
- Monday - Friday
8:00am - 5:00pm EST
- Worldwide
1-888-412-0122