Emergency De-Icer Silicone Rubber Heating Tape with Adjustable Thermostat Control (HSTAT-R) - BriskHeat

Emergency De-Icer Silicone Rubber Heating Tape with Adjustable Thermostat Control (HSTAT-R)

Silicone Rubber Heating Tape with Adjustable Thermostat Control - BriskHeat

BriskHeat’s XtremeFLEX® Emergency De-Icer is for rapid-de-icing, thawing, temperature control, and emergency supplemental heat. It is used on metal pipes, valves, pumps, and other metal surfaces. Just wrap the flexible de-icer tape around the desired object you want to heat, set the dial for desired heat.

  • Silicone rubber heating tape with built-in adjustable thermostat temperature controller.
  • Adjustable dial provides fast uniform heat from 50°F to 160°F (10°C to 71°F).
  • Portable plug-and-play design for easy temporary heat.
  • Built-in 2-prong (NEMA1-15) molded plug.
  • Extremely flexible and versatile heating tape.
  • Ideal for a wide range of heating/warming and freeze protection applications including de-icing pipes, valves, pumps and more.
  • Moisture and chemical resistant.
  • Multi-stranded resistance wire heating element provides exceptional flexibility and durability.
  • Rapid thermal response provides accurate heat when you need it.
  • Safe for use with glass and electrically conductive metal surfaces.
  • Available in lengths 2’ (0.6m), 6’ (1.8m), 10’ (3.0m).
  • 10X heating output of a typical water pipe freeze protection product.

Common Uses:

  • De-Icing Pipes
  • Thawing Valves
  • Warming Pumps
  • Improving Cold Weather Related Flow Problems

1 Year Warranty

Learn More: How To Install Heating Tape

  • Adjustable thermostat range: 50°F to 160°F (10°C to 71°C)
  • Maximum exposure temperature: 450°F (232°C)
  • Minimum bend radius: 0.25” (6mm)
  • Construction:
    • Fiberglass knit and braided heating element
    • Silicone rubber extruded outer sheath
  • Power density: 6.0 W/in2 (0.007 W/mm2 )
  • 6ft (1.8m) power cord with standard 2-prong molded wall plug (NEMA 1-15)


Remove de-icer from packaging. Visually inspect de-icer. Do not use if torn or damaged.


The flexible emergency de-icer can be installed on both a flat and/or curved surface. For a flat surface, lay the de-icer tape onto the surface to be heated. For a curved surface, wrap the heating tape onto the surface to be heated. Attach the de-icer tape to the surface by using an aluminium or fiberglass adhesive tape, rated to a minimum temperature of 170°F.

  • Ensure the de-icer tape is not kinked, twisted, or any portion of the heating tape hanging free from the surface (A).
  • Do not overlap de-icer tape on itself (B).
  • Thermostat sensor must be in full contact with object to be heated. Sensor is located underneath temperature controller box (C).


Plug power cord into appropriate electrical power outlet.


  • No hanging tape from surface
  • No overlapping between heating tapes
  • Thermostat sensor in full contact with object Adjust dial to desired setting.
  • Start heating at a lower temperature gradient and gradually increase to desired temperature.
  • For best results, cover heating area and emergency de-icer with 1/2” thick fiberglass insulation or equivalent insulation rated to the appropriate temperature.

CAUTION: Temperature controller dial and enclosure will become very hot after use. Always unplug heater and allow to cool prior to handling.

Available Options: Emergency De-Icer Silicone Rubber Heating Tape with Adjustable Thermostat Control (HSTAT-R)

QuantityPriceUOMPart NumberLengthWattage
HSTAT10R10 ft (3.1 m)720
HSTAT2R2 ft (0.6 m)144
HSTAT4R4 ft (1.2 m)288
HSTAT6R6 ft (1.8 m)432
HSTAT8R8 ft (2.4 m)576
NOTE: Selecting Configuration Options limit / refine the available products; to match your selection criteria.


Customers Who Viewed This Were Also Interested In

Don't see your size or option? Have a question about which BriskHeat product is right for you? Need Application assistance? Contact Us. We are here to help!

Monday - Friday
8:00am - 5:00pm EST