Our offices will be closed Friday March 29th for Good Friday. Orders will be entered on the next business day.

Wrap-around IBC/Tote Tank Heaters (TOTE)

Ordering Options:
Starting at $1,899.00
/ Each

Description

BriskHeat wrap around IBC tote and tank heaters are an all-in-one solution to maintain a constant and consistent heat to your bulk containers. Designed for use with caged or direct-contact metal and plastic IBC totes and adjustable straps for larger and smaller sizes - never over or under heat product again!

  • Built in high-limit safety thermostat: manual reset 195°F (91°C)
  • 360° grounded heating element for safety
  • Outer Material: silicone impregnated cloth
  • Available in 3 standard heigh sizes to meet your needs.

Part Number

TOTE-Series

Additional Features: 

  • Insulated, full coverage design
  • Adjustable thermostat control - up to 160°F (71°C)
  • Two seperate heat zones allows users to adjust heater ouput as content levels decrease
  • Even heat distribution and maximum energy efficiency
  • Does not contaminate or scorch your product
  • Easy to use - plug-and-play design
  • Reusable and rugged for long service life

Outer Material: Silicone impregnated cloth
Insulation: 0.25 in (6 mm) thick fiberglass
Height: 36 in (914 mm), 42 in (1067 mm), or 48 in (1220 mm)
Circumference: Fits any vessel from 160 in (4064 mm) to 192 in (4877 mm)
Closure Method: Adjustable nylon straps with buckles (two across the top  and three around the tank)
Voltage Options: 120 or 240 VAC
Operating Temperature: Adjustable up to 160°F (71°C)
Maximum Exposure Temperature: 500°F (260°C)
Built-in High-Limit Safety Thermostat: Manual reset 195°F (91°C) Heating Element: 360° grounded heating element for your Safety Dielectric Strength: Over 2000 volts
Power Cord: 6 ft (1.8 m) long

    • 120 VAC: 3-prong grounded plug (NEMA 5-15P)
    • 240 VAC: Choice of 3-prong grounded plug (NEMA 6-15P) or crimped ferrule leads

IP Rating: IP2X

 

      

CE Approved when ordered with crimped ferrule lead option

Part No. 120 VAC with NEMA 5-15P Plug  Part No. 240 VAC with NEMA 6-15P Plug  Part No. 240 VAC with Cringed Ferrule Leads  Height in (mm)  Capacity gal (l)  Tank Perimeter Minimum in (mm)  Tank Perimeter Maximum in (mm)  Weight lbs (kg)  Total Wattage
120/240v 
TOTE361-ADJV TOTE362-ADJV TOTE362-ADJ-CVE 36 (614) 175 - 250 (640 - 950) 160 (4060) 192 (4880) 34 (15) 1440/2880
TOTE421-ADJV TOTE422-ADJV TOTE422-ADJV-CVE 42 (1067) 275 (1000) 160 (4060) 192 (4880) 40 (18) 1440/2880
TOTE481-ADJV TOTE482-ADJV TOTE482-ADJV-CVE 48 (1220) 330 (1250) 160 (4060) 192 (4880) 46 (21) 1440/2880

How to Measure Your Tote Tank / Intermediate Bulk Container / IBC

1. Measure the height of the tote tank / IBC not including the pallet or support stand.   ________   (Height)
2. Measure the length and width of the tank. This determines the tank perimeter for the heated area.

______(Tank Length) X 2    +  ______(Tank Width) X 2 = ________ (Perimeter)

Note: If heater length measurement is below 160" (4064mm) or above 192" (4877mm), contact factory for heater recommendation

IBC measurement guidelines

Instruction Manuals
Approvals/Certificates
pdf
(Size: 296.1 KB)
Catalog/Specifications Sheet
Don't see your size or option?

Have a question about which BriskHeat product is right for you?
Need Application assistance? Contact Us. We are here to help!

  • Monday - Friday

    8:00am - 5:00pm EST

  • Worldwide

    1-888-412-0122

  • Email Us

    [email protected]