ACR3 Hot Bonder Kit - BriskHeat



ACR3 Hot Bonder Kit

The ACR®3 Hot Bonder composite curing KIT

Number of Zones Voltage Part Number NSN*
1 120VAC ACR-3-S120KIT 4920-01-538-9296
1 240VAC ACR-3-S240KIT 4920-01-538-9296
2 120VAC ACR-3-D120KIT 4920-01-545-5200
2 240VAC ACR-3-D240KIT 4920-01-545-5200

* Please indicate voltage when ordering with NSN.

ACR 3 Hot Bonder Kit with Heaters includes:

  • ACR®3 hot bonder unit
  • One 10" x 10" (254 x 254mm) SR composite heat curing blanket per zone
  • One 12" x 12" (305 x 305mm) SR composite heat curing blanket per zone
  • One 16" x 16" (406 x 406mm) SR composite heat curing blanket per zone
  • 10ft (3m) vacuum hoses (2 per zone)
  • 10ft (3m) input power cord (1 per zone)
  • 5ft (1.5m) heater output power cord (1 per zone)
  • USB flash disk
  • J-type thermocouples (10 per zone)
  • Standard connector adapters for thermocouple receptacles (10 per zone)
  • Vacuum bag feed-throughs (2 per zone)
  • Extra printer ribbon and paper (1 per zone)
  • DVD Training Video
BriskHeat ACR3 Hot Bonder Kit
Perform Cures Faster and Better
  • Single or dual zone
  • 8.4" (213mm) full-color touch-screen
  • Dual vacuum system: Built-in electric vacuum pump and vacuum venturi for each zone
  • Universal voltage: 100-130VAC, 200-240VAC
  • 30 amps output per heat zone
  • 10 thermocouple sensors per zone
  • Accepts J-type thermocouples
  • Includes everything you need – Training DVD
 Easy-To-Use Software on a Full-Color HD Touchscreen
  • Quick 3-step programming: Stores up to 30 programs on hot bonder
  • Easy-to-follow menu choices
  • Quick and easy data entry: Uses simple drop-down menus and a familiar QWERTY keyboard interface
  • Secure: Multiple levels of password protection
  • Upgradeable
 

  • Multi-task: Perform several operations at once
  • Retains history of last 12 cures
  • Customized post cure analysis: Data logging intervals 1 to 99 minutes
  • Multiple language support: English, German, Russian, Chinese (Mandarin)
  • Transfer and archive post cure data history to your PC
  • Instantaneously analyze your data on your spreadsheet and word processor programs including Microsoft® Excel® and Word®
  • Transfer your programs quickly from one bonder to another
  • Update your hot bonder easily with the latest software version for FREE.
 Fast and Simple Data Transfer with USB Drive (USB Flash Disk Included)
  • Transfer and archive post cure data history to your PC
  • Instantaneously analyze your data on your spreadsheet and word processor programs including Microsoft® Excel® and Word®
  • Transfer your programs quickly from one bonder to another
  • Update your hot bonder easily with the latest software version for FREE.
General
  • Single or dual zone
  • 8.4" (213mm) touch-screen with easy-to-use interface
  • USB port for data transfer (USB flash disk included)
  • Input ground fault interrupter breaker protected
  • Audible and visual alarms for high and low temperature / vacuum limits
  • Data logs digitally or through built-in printer : prints and records real-time status of cure including program parameters

 

Power
  • Universal Input Voltage: 100-130VAC, 200-240VAC
  • MAINS supply voltage fluctuations up to ±10% of the nominal voltage
  • Transient over voltages typically found on a Category II power source: i.e. a lighting circuit
  • Frequency: 50-60Hz
  • 30 amps maximum per zone
  • Output cord receptacle: NEMA L15-30R 
Vacuum
  • Dual vacuum system: Built-in electric vacuum pump and vacuum venturi for each zone
  • Pressure: 28” Hg (13.8PSI)
  • Ability to manually adjust pressure for each zone
Temperature Control
  • Cure up to 1400oF (760oC)
  • 10 thermocouple sensor inputs per zone
  • Accepts J-type thermocouple connectors
  • Accuracy: ±3°F (1.67°C)
  • Monitors all thermocouples for alarms
Environment
  • Intended for use in dry environments. Do not expose to wet spray.
  • Altitude up to 6562ft (2000m)
  • Storage temperature range: -4oF to 140oF (-20oC to 60oC)
  • Operating temperature range: 41oF to 104oF (5 oC to 40oC)
  • Maximum relative humidity: 80% for temperatures up to 88oF (31oC) decreasing linearly to 50% relative to humidity at 104oF (40oC)
  • Pollution degree 2 (normally only non-conductive pollution occurs, however a temporary conductivity caused by condensation must be expected)

 

 

BriskHeat ACR3 Hot Bonder is the solution for quick and easy on site composite repairs.

Configuration Options
NOTE: Selecting Configuration Options limit / refine the available products; to match your selection criteria.

Available Options: ACR3 Hot Bonder Kit

Part Number Voltage DESCRIPTION
ACR-3-D120KIT 120 ACR3 Hot Bonder; Dual Zone Kit with Blankets; 120V
ACR-3-D240KIT 240 ACR3 Hot Bonder; Dual Zone Kit with Blankets; 240V
ACR-3-S120KIT 120 ACR3 Hot Bonder; Single Zone Kit with Blankets; 120V
ACR-3-S240KIT 240 ACR3 Hot Bonder; Single Zone Kit with Blankets; 240V
NOTE: Selecting Configuration Options limit / refine the available products; to match your selection criteria.

Don't see your size or option? Have a question about which BriskHeat product is right for you? Need Application assistance? Contact Us. We are here to help!

Monday - Friday
8:00am - 5:00pm EST
Worldwide
1-614-294-3376