Wrap-around IBC/Tote Tank Heaters (TOTE)

Wrap-around IBC/Tote Tank Heaters (TOTE)


  • Wrap around IBC/TOTE tank heaters are an all-in-one heater with built-in insulation and a temperature controller to maximize heat efficiency and heat-up time.
  • Designed to wrap around an IBC/TOTE to heat the contents while insulating to keep the heat exactly where it needs to be.
  • Wrap around IBC/TOTE heaters provide the most practical, efficient means of freeze protection, viscosity control, thermal mixing, and temperature maintenance of materials.
  • Easy-to-use dial temperature controller available in °F or °C (see ordering options).
  • Plug-and-Play design is ready for immediate use out of the box.
  • Fits any container with a total perimeter between 160” (4064mm) to 192” (4877mm).
  • Available in three standard height sizes to meet your needs.
  • Designed for use with caged or direct contact metal and plastic IBC/TOTE containers.
  • Two-Zone heater design allows heat output to be adjusted when content levels decrease.
  • Non-Invasive wrap-around heater design allows you to heat a tote tank / IBC from the outside without risk of contaminating or scorching materials inside.
  • Built-in manual reset high-limit safety thermostat to prevent over-heating.
  • Grounded heating element meets NEC 427.23.
  • Attachment method using adjustable nylon straps with buckles (Two across the top and three around the tank).
  • Adjustable nylon straps allow the heater to fit a wide variety of tank sizes without sagging, reducing incidental damage from forklifts.
  • Mouse-hole cut-out reduces downtime by providing easy access to spigot without requiring the user to remove the heater.
  • Speed up the flow of slow moving and uncooperative contents such as honey, molasses, lube oil, and more!

Tote Tank Heater Features and Benefits

* For increased thermal efficiency, add a BriskHeat IBC/TOTE cover reduce heat loss through the top surface.  See IBC/TOTE tank heater accessories for more information

* 240VAC model is strongly recommended for applications that involve heat-up and melting due to the higher wattage requirements.


  • Inner Material: Silicone impregnated cloth
  • Outer Material: Silicone impregnated cloth
  • Fits any container with perimeter 160” to 192” (4064mm to 4877mm)
    • Minimum: 40" x 40" (1016mm x 1016mm)
    • Maximum: 48" x 48" (1219mm x 1219mm)
  • Three standard height sizes: 36" (914mm), 42" (1067mm), 48" (1220mm)
  • Two separate heat zones: top and bottom
  • Adjustable thermostat: 50°F to 160°F (10°C to 71°C)*
  • Built-in manual reset high-limit safety thermostat set at 195oF (91oC) for each heating zone
  • Insulation: 1/4" (6mm) fiberglass insulation
  • Available voltages: 120, 240VAC
  • Wattage:
    • 120VAC = 1440 watts
    • 240VAC = 2880 watts
  • Power cord:
    • 120VAC = 6ft (1.8m) long with standard 3-prong NEMA 5-15 power plug
    • 240VAC = 6ft (1.8m) long with standard 3-prong NEMA 6-15 power plug


Heater Height

Total Watts
120V / 240V

Heater Weight

36” (914mm)

1440 / 2880

34 lbs (15kg)

42” (1067mm)

1440 / 2880

34 lbs (15kg)

48” (1220mm)

1440 / 2880

34 lbs (15kg)


* If precise temperature control is required for your application, please contact us or your local distributor for application assistance and product solutions

How to Measure Your Tote Tank / Intermediate Bulk Container / IBC

IBC measurement guidelines

1. Measure the height of the tote tank / IBC not including the pallet or support stand.   

________   (Height)

2. Measure the length and width of the tank. This determines the tank perimeter for the heated area.

______(Tank Length) X 2    +  ______(Tank Width) X 2 = ________ (Perimeter)

Note: If heater length measurement is below 160" (4064mm) or above 192" (4877mm), contact factory for heater recommendation.

Select Parameters

Select Parts

Quantity Part Number Voltage Height Temperature Control Range Wattage Price UOM
TOTE361-ADJ 120 36" (914 mm) 50°F to 160°F 1440
TOTE361-ADJ-C 120 36" (914 mm) 10°C to 71°C 1440
TOTE362-ADJ 240 36" (914 mm) 50°F to 160°F 2800
TOTE362-ADJ-C 240 36" (914 mm) 10°C to 71°C 2800
TOTE421-ADJ 120 42" (1067 mm) 50°F to 160°F 1440
TOTE421-ADJ-C 120 42" (1067 mm) 10°C to 71°C 1440
TOTE422-ADJ 240 42" (1067 mm) 50°F to 160°F 2800
TOTE422-ADJ-C 240 42" (1067 mm) 10°C to 71°C 2800
TOTE481-ADJ 120 48" (1220 mm) 50°F to 160°F 1440
TOTE481-ADJ-C 120 48" (1220 mm) 10°C to 71°C 1440
TOTE482-ADJ 240 48" (1220 mm) 50°F to 160°F 2800
TOTE482-ADJ-C 240 48" (1220 mm) 10°C to 71°C 2800


Customers Who Viewed This Were Also Interested In

Don’t see your size or option? Have a question about which BriskHeat product is right for you? Need Application assistance? Contact Us. We are here to help!

Monday - Friday
8:00am - 5:00pm EST
United States & Canada