|
SRL and SRP Silicone Rubber Heating Blankets
Product Highlights
Suitable for a large range of surfaces like tanks, hoppers, conveyors, silos, etc.
Exceptional durability
Easy peel 'n stick pressure sensitive adhesive backing option
Grounded heating element meets NEC 427.23
Optional high-limit thermostat to protect heater and contents being healed
up to 358°F (181°C)
73/23/EEC
Specifications
- Standard power densities:
- SRL series(*): 2.5 watts / in² (0.004 watts / mm²)
- SRP series: 1.25 watts / in² (0.002 watts / mm²)
- Moisture, chemical, and radiation resistant
- Heating element is laminated between two layers of 20 mil fiberglass reinforced silicone rubber
- Exposure temperature range: -60°F to 450°F (-51°C to 232°C)
- Patented grounded heating element
- Dielectric strength over 2000 volts
- Silicone density 21.7 oz / yd² (736 grams / m²) per layer
- Silicone rubber power leads: 48" (1219mm) standard length
- 120, 208, 240, 277, 480, or 600VAC
Consult factory if SRL series will be used on a plastic surface
SRL and SRP Silicone Rubber Heating Blankets / Pads Specification Sheet
Ordering Information
Standard Sizes and Wattages
| Size | Total Watts | ||
| Width | Length | SRL series: | SRP series: |
| in (mm) | in (mm) | 2.5 watts / in² (.004 watts / mm²) | 1.25 watts / in² (.002 watts / mm²) |
| 6 (152) | 12 (305) | 180 | 90 |
| 6 (152) | 24 (610) | 360 | 180 |
| 6 (152) | 36 (914) | 540 | 270 |
| 12 (305) | 12 (305) | 360 | 180 |
| 12 (305) | 24 (610) | 720 | 360 |
| 12 (305) | 36 (914) | 1080 | 540 |
| 18 (457) | 18 (457) | 810 | 405 |
| 18 (457) | 36 (914) | 1620 | 810 |
| 24 (610) | 24 (610) | 1440 | 720 |
| 24 (610) | 36 (914) | 2160 | 1080 |
Note: Plug not included
BriskHeat® Silicone Rubber Heating Blankets can be configured-to-order: Contact your local distributor or BriskHeat® for more details.
- Different Shapes / Sizes
- Other Voltages
- Other Power Densities
- Power Plugs
Part Number Matrix
Accessories
Part Number |
Description |
|
 |
Varies |
A temperature controller is required with all SRL and SRP silicone rubber heating blankets. |
  |
AAT2180 (2" x 180') |
Maintains the heating blanket in intimate contact with the surface to be heated while adhesive cures.Temperature limit: 550°F (288°C). |
 |
SRLCB |
Provides a strain relief for the blanket power wires and a mounting means for a 3/4" (19mm) electrical conduit. |
 |
HCP1 (1lb) HCP3 (3lb) |
Used to fill any voids between blanket and surface being heated. |
Support
Documents
- SRL and SRP Silicone Rubber Heating Blanket Specification Sheet
- SRL and SRP Silicone Rubber Heating Blanket Instruction Manual
- Silicone Rubber Heating Blanket Accessories
Click Here to Go Back to the Silicone Rubber Heating Blankets / Pads Main Page
Save to Favorites
Print this Page