Thank you for your interest in BriskHeat. Please contact us at 1-800-848-7673 (U.S. & Canada) or 614-294-3376 (World wide) for ordering information and all other questions. Your heating specialist since 1949.

Our Story Products Applications Industries Distributors / Reps Global Contact Us

800-848-7673

Cloth Heating Jackets XtremeFLEX^® Heating Tapes and Cords Silicone Rubber Heating Blankets Drum / Pail Heaters IBC / Tote Tank Heaters Gas Cylinder Warmers Hopper Heating Systems Self-Regulating Heating Cable Constant-Wattage Heating Cable Mantle Heaters Resistance Wire Temperature Controllers Hazardous-Area Heaters and Controls Hot Bonders and Curing Blankets

 

ST-series Cloth Jacket Heating System

Product Highlights

Click to Enlarge

Our most requested configuration

Easy-to-install and remove reusable heat and insulation system

Centipede^®-ready*: Temperature control for each heating jacket

Heat-up to 392°F (200°C) within 2 hours**

Designed for up to Class 100 indoor environments

Cool-touch outer surface

, 73/23/EEC

Other cloth jacket configurations available. See our configure-to-order cloth jacket section for more information:

Class 10 environments Temperatures up to 1100°F (595°C) Application-specific wattages

Insulation thickness Different high limit thermostats

* Centipede^®-ready: Includes Centipede Module power connector and built-in platinum RTD sensor. CENTMOD-F, Centipede Operator Interface, and CAT5 communication cable sold separately.

Specifications

• Outer facing: TEFLON^® Grey
• Inner liner: TEFLON^® Tan
• 1/4" (6mm) thick insulation
• 100 - 130VAC or 200 - 250VAC, 50-60Hz
• Dielectric strength: 1000 VDC
• Built-in high-limit safety thermostat: Set at 500°F (260°C)
• Closure: Hook and loop fastener like VELCRO^®
• IP 67 four-pin (NEMA 6P equivilent) power plug and jumper designed for easy system installation
• 6" (152mm) power leads

Cloth Jacket Specification Sheet

Ordering Information

Match up to two pipe components into one heating jacket (e.g. a 6" straight section with a 90° elbow). For more complex configurations, see our configure-to-order cloth jacket section.

How to Order: One Pipe Component Heating Jackets

Part Number Matrix

Nominal Tube Outer Diameter 1.50" 40mm 2.00" 50mm 3.00" 80mm 4.00" 100mm 6.00" 150mm

Instructions: Use the part number matrix above to create the part number. To determine the appropriate component code, use the pipe component catalog below.

How to Order: Two Pipe Component Heating Jackets

Part Number Matrix

 

Instructions: Use the part number matrix above to create the part number. To determine the appropriate component codes, use the pipe component catalog below. Click here for tips on selecting easy-to-install component combinations and examples of component combinations.

Pipe Component Catalog

Click on the component for ordering information. Contact us if you are not able to match your component to the correct heating jacket. Our cataloging system gets updated on a daily basis.

• Straight sections
• 90° Elbows
• 45° Elbows
• KF & CF Pipe Clamps / Flanges
• Unistruts
• Tees
• Reducers
• Bellows
• Valves- Contact factory for more information.

Accessories

• Centipede^® Temperature Control System
• Input Power Cord

Click Here to Go to the Cloth Heating Jacket Introduction Page

Save to Favorites

Print this Page