Airbus A320 Infrared Thermography NDT Kits
Perform Moisture Intrusion Testing on Elevators
Thermographic Camera Image |
Product Highlights
The heating solution for Airbus NDT kits for A320 series
elevators as described in Airbus NonDestructive Test Manual 55-20-07, Method B.
Simple-to-operate preprogrammed temperature controller
Dual 110/220 volt design - No transformer needed
Three heating blankets designed for the A320 elevator
- Durable parallel wired heating elements
- Two-year warranty
Over 50 years experience
Experts in many fields of surface heating
Leaders in composite repair technology
|
|
Easy-to-Use Full-Color Touch Screen Control
Other Features
- Single plug-n-play connector from the blanket to the controller containing all power and sensor wiring
- Testing data is easily saved to a USB flash drive (included)
- Easy to handle, wheeled transport and storage case
- Kit A: 2 cases only 53.8" x 16.5" x 6.7" (1366mm x 419mm x 424mm) weighing less than 50lbs (23 kg)
- Kit B: 1 case only 21.7" x 14.1" x 8.9" (551mm x 358mm x 226mm) 25lbs (11kg)
- Heater blanket strain relief is built through the entire edge of the blanket for increase durability
- Includes six 9" non-slip holding clamps
Specifications
Compact Storage Cases (Kits A,B) 
Temperature Controller (Kit B)  All Storage Cases Have Handles and Wheels for easy travel |
Kit A, Blankets
- Three flexible blankets per Airbus size requirements
- No seams, all blankets are of a one-piece construction
- Dual voltage blankets, 110 or 220 volt
- Power density: 1400 watts/m² (0.9 watts/in²)
- Two J-type thermocouples built into each blanket(1 primary, 1 spare)
- All power and sensor wires in a single connector(plug-n-play)
- Heater blanket is very flexible and durable
- Insulating blankets
- Two-year warranty
73/23/EEC- Two Transport containers
Kit B, Temperature Controller
- Universal voltage 100-240 VAC
- Dual zone will control one individual heater, or two heaters in tandem
- Automatic and independent temperature control per heater
- Preset locked ramp/soak (slope) temperature
- Accuracy ± 1°C (1.8°F)
- End of cycle audible alarm
- Auto shut-down of heater power at end of cycle
- Differential ground fault (earth leakage) breakers
- Ground connection to elevator
- Visual or audible alarms for: ground fault, temperature limits, & thermocouple failure
- 13-minute dwell count down timer
- Additional independent 10-minute test cycle timer, manually triggered
- Simultaneous reading of both heater blanket thermocouples
- Cycle will not start if process temperature is above 60°C
- High temperature process shutdown and alarm at 90°C
- USB port for post cycle data transfer to flash drive (USB flash disk included)
- Two-year warranty
- 73/23/EEC (Low Voltage Directive), 89/336/EC (EMC Directive)
- Transport container
Kit C, 110/220V Transformer
- Not Required with BriskHeat® Dual voltage design
Ordering Information
| Part Number | Description |
| 320BLANKETKIT | Kit A: Heating Blankets. Kit includes three blankets per Airbus size requirements (SRA320A, SRA320B, and SRA320C) |
| NDTCONTROLLER | Kit B: Temperature Controller |
| THERMOCAMERA | Thermographic Camera |
Save to Favorites
Print this Page