Centipede 2 STACK™ Operator Interface

Product Highlights

Program and monitor up to 512 zones of control through a PLC or external computer

Space and cost-saving design.  Ideal for control panel integration

Easy DIN-Rail installation

AC power: No independent power supply is required

Specifications

• Monitors and edits up to 512 modules/zones: displays actual temperature, RTD status, set-point, high-limit alarm setting, low-limit alarm setting, and power duty cycle of each heater
  • Time / date stamped alarm messages in real-time
  • The last 5 error messages are stored for easy diagnostics
• Ability to change settings individually or globally across system
• Automatically assigned zone addresses
• Temperature setting range: 0-325°C (displayed in °C)
• Communication with PLC or external computer
  • Modbus RTU over RS-232C
  • Local User Interface (LUI) over RS-232C
  • Telnet over Ethernet
• Dry contact master alarm relay: NO or NC (Normally Open or Normally Closed) Quickly and easily program the following parameters (individually or globally across system): temperature set-point, high-limit alarm temperature, and low-limit alarm temperature
• LEDs indicate status for main power, alarms, and internal / external communication links
• Universal input voltage: 100-240VAC up to 20 amps
• Two fuses: 250VAC 20 amp rated, mini-fuse (5x20mm), fast blow
• Screw terminals for power input
• Dimensions: 4.5” H x 5.8” W x 3.9” D (115mm H x 142mm W x 99mm D)
• Installs on 35mm standard DIN-Rail
• Environmental temperature: -13 to 131°F (-25 to 55°C)
• Storage temperature: -40 to 185°F (-40 to 85°C)
• Ambient humidity: 5 to 95% (non-condensing)
•  

Centipede 2 Catalog

Ordering Information

Contact us for a quotation and application assistance.

Part Number: C2STACK-OI

Instruction Manuals

Centipede 2 DIN-Rail STACK Installation Instructions (Part # 41295)

Centipede 2 DIN-Rail STACK User Interface Instructions (Part # 41295-01)