ACR 3 Hot Bonder

EASIER  •  FASTER  •  BETTER

The Premier Full-Service Hot Bonder to Debulk and Cure Resins, Prepregs, Adhesives, and Fibers.

Easy-to-Use Full-Color Touchscreen

NEW Fast Dual Vacuum System: Both a Built-in Electric Pump and Vacuum Venturi

NEW Rugged Carrying Case and Improved Design

NEW Handles and Wheels for Easy Transport

EASY Data Transfer with USB Flash Drive

UPDATED Software with Improved Interface

360^o View of the ACR 3 Hot Bonder

Product Highlights

Perform Cures Faster and Better

• Single or dual zone
• 8.4" (213mm) touch screen
• Dual vacuum system: Built-in electric vacuum pump and vacuum venturi for each zone
• Universal voltage: 100-130VAC, 200-240VAC
• 30 amps output per heat zone
• 10 thermocouple sensors per zone
• Accepts J-type thermocouples
• Includes everything you need

Easy-To-Use Software on Full-Color Touchscreen

Fast and Simple Data Transfer with USB Drive (USB Flash Disk Included)

• Transfer and archive post cure data history to your PC.
• Instantaneously analyze your data on your spreadsheet and word processor programs including Microsoft^® Excel^® and Word^®
• Transfer your programs quickly from one bonder to another
• Update your hot bonder easily with the latest software version for FREE.

Product Specifications / Part Numbers / NSNs

General

• 8.4" (213mm) touch screen with easy-to-use interface
• USB port for data transfer (USB flash disk included)
• Input ground fault interrupter breaker protected
• Audible and visual alarms for high and low temperature / vacuum limits
• Data logs digitally or through built-in printer : prints and records real-time status of cure including program parameters

Power

• Input Voltage: 100-130VAC, 200-240VAC
• MAINS supply voltage fluctuations up to ±10% of the nominal voltage
• Transient over voltages typically found on a Category II power source: i.e. a lighting circuit
• Frequency: 50-60Hz
• 30 amps maximum per zone
• Output cord receptacle: NEMA L14-30R 

Vacuum

• Pressure: 28in Hg (13.8PSI)
• Ability to manually adjust pressure for each zone

Temperature Control

• Cure up to 1400^oF (760^oC)
• 10 thermocouple sensor inputs per zone
• Accepts J-type thermocouple connectors
• Accuracy: ±3°F (1.67°C)
• Monitors all thermocouples for alarms

Environment

• Intended for use in dry environments. Do not expose to spray.
• Altitude up to 6562ft (2000m)
• Storage temperature range: -4 to 140^oF (-20 to 60^oC)
• Operating temperature range: 41 to 104^oF (5 to 40^oC)
• Maximum relative humidity: 80% for temperatures up to 88^oF (31^oC) decreasing linearly to 50% relative to humidity at 104^oF (40^oC)
• Pollution degree 2 (normally only non-conductive pollution occurs, however a temporary conductivity caused by condensation must be expected)

The ACR 3 Hot Bonder can be purchased either as a kit with composite curing blankets or as a base unit.

Kit with Composite Curing Blankets

*Please indicate voltage when ordering with NSN.

A kit includes

• ACR 3 hot bonder unit
• One 10" x 10" (254 x 254mm) SR composite heat curing blanket per zone
• One 12" x 12" (305 x 305mm) SR composite heat curing blanket per zone
• One 16" x 16" (406 x 406mm) SR composite heat curing blanket per zone
• 10ft (3m) vacuum hoses (2 per zone)
• 10ft (3m) input power cord (1 per zone)
• 5ft (1.5m) heater output power cord (1 per zone)
• USB flash disk
• J-type thermocouples (10 per zone)
• Standard connector adapters for thermocouple receptacles (10 per zone)
• Vacuum bag feed-throughs (2 per zone)
• Extra printer ribbon and paper (1 per zone)

Base Unit

Base unit includes

• ACR 3 hot bonder unit
• 10ft (3m) vacuum hoses (2 per zone)
• 10ft (3m) input power cord (1 per zone)
• 5ft (1.5m) heater output power cord (1 per zone)
• USB flash disk
• J-type thermocouples (10 per zone)
• Standard connector adapters for thermocouple receptacles (10 per zone)
• Vacuum bag feed-throughs (2 per zone)
• Extra printer ribbon and paper (1 per zone)

Support

• FREE Software Update
• Informational Brochure
• Technical Data Sheet
• Operating Instruction Manual (PN: 41039-03)>

Ordering Information

Contact us for a quotation and application assistance.

Interested in Wind Turbine Blade Field Repair? We have a complete kit available to solve this application

Click here for more information about the BriskHeat ACR 3 Wind Turbine Repair Kit.