Hot Bonder

The NEW AND IMPROVED ACR 3 Hot Bonder is now available.

• The Premier Full-Service Hot Bonder to Debulk and Cure Resins, Prepregs, Adhesives, and Fibers.
• Easy-to-Use Full-Color Touchscreen
• Simple Data Transfer with USB Flash Drive
• NEW Rugged Carrying Case and Improved Design
• NEW Handles and Wheels for Easy Transport
• NEW Dual Vacuum System: Both a Built-in Electric Pump and Vacuum Venturi
• UPDATED Software with Improved Interface
• Many more powerful capabilities

Click Here for complete information.

ACR II Specifications

ACR II Hot Bonder Specification Sheet

General

• Single or dual zone
• 10.4" (264mm) touch screen with easy-to-use interface
• USB port for data transfer (USB flash disk included)
• Transfer post cure data to your PC.
• Input ground fault interrupter breaker protected
• Audible and visual alarms for high and low temperature / vacuum limits
• Digital data logger: prints and records real-time status of cure including program parameters
• Pre-programmed with English and German languages
• 73/23/EC (low voltage directive) and 89/336/EC (EMC directive) for part number ACR-IIN1E30 and ACR-IIN1V30

Power

• Input Voltage: 100-130VAC, 200-240VAC
• MAINS supply voltage fluctuations up to ±10% of the nominal voltage
• Transient over voltages typically found on a Category II power source: i.e. a lighting circuit
• Frequency: 50-60Hz
• 30 amps maximum per zone
• Output cord receptacle: NEMA L14-30R 

Vacuum

• With built-in electric vacuum pump or vacuum venturi
• Pressure: 27-28in Hg (13.26-13.75PSI)
• Ability to manually adjust pressure for each zone

Temperature Control

• Cure up to 1400^oF (760^oC)
• 10 thermocouple sensor inputs per zone
• Accepts either standard or mini type J  thermocouple connectors
• Multiple levels of password protection
• Easy-follow menu choices
• Allows you to perform several operations at once
• Stores up to 30 programs on bonder
• Retains history of last 12 cures
• Advanced administrative functions including a system high temperature limit

Environment

• Intended for use in dry environments. Do not expose to spray.
• Altitude up to 6562ft (2000m)
• Storage temperature range: -4 to 140^oF (-20 to 60^oC)
• Operating temperature range: 41 to 104^oF (5 to 40^oC)
• Maximum relative humidity: 80% for temperatures up to 88^oF (31^oC) decreasing linearly to 50% relative to humidity at 104^oF (40^oC)
• Pollution degree 2 (normally only non-conductive pollution occurs, however a temporary conductivity caused by condensation must be expected)

Part Numbers

Click Here for additional composite heat Curing blanket information.

Support

Documents and Videos

• ACR II Hot Bonder Specification Sheet
• ACR II Hot Bonder and Composite Heat Curing Blanket Demonstration Video (9:37)
• Part # 41039-01: ACR II Hot Bonder Instruction Manual
• ACR II Hot Bonder Calibration Instructions

Software

• Click Here for ACR II Hot Bonder FREE Software & Updates

Click Here to Receive a Quote or Additional Information.